Gujarati Sarees: Patola, Gharchola, Bandhani and the Crafts of Gujarat
By Nishita Nathani16 min read
A Gujarati saree, or Gujarati sadi, is not one weave but a family of crafts from one state: the double ikat Patola of Patan, the tie-dyed Bandhani of Jamnagar and Kutch, and the bridal pair of Panetar and Gharchola are the best known. Around them sit Ajrakh block printing, Tangaliya and Bhujodi weaving, Mashru satin and the mirror-lit embroidery of Kutch, each with its own region, technique and place in family life.
This guide puts all nine side by side so you can see how they differ, which have a Geographical Indication (GI), and what a Gujarati bride and her guests usually wear on each wedding day. Every craft already has its own MAYIN guide, linked in each section, so here you get the short version and the comparison, not a repeat.
What Makes a Saree Gujarati
Gujarat has three textile regions that matter for sarees. North Gujarat, around Patan, is the home of Patola and Mashru. Saurashtra, the peninsula in the west, gives Jamnagari Bandhani, Rajkot Patola and the Tangaliya of Surendranagar. Kutch, the far north-west, is where Ajrakh printing, Bhujodi weaving, Kutch Bandhani and Kutch embroidery come from. Many of these crafts were first made for odhnis (veils), shawls and skirts, and moved onto the saree later.
Two ideas tie them together. The first is resist work: in Patola, Bandhani, Gharchola and Ajrakh, parts of the thread or cloth are protected from the dye so the pattern stays in the colours underneath. The second is the pallu. Gujarati women traditionally show the pallu at the front of the body, which is why so much of the work, from zari grids to bandhani motifs, is concentrated there.
For the wider picture of regional sarees across India, see types of sarees in India. For how GI tags work and which other sarees hold one, see our GI tag sarees guide.
The Nine Crafts Compared
Read the table by technique first. Woven crafts carry the pattern in the threads, dyed crafts in the cloth after weaving, printed crafts in blocks pressed onto the cloth, and embroidery in stitches added on top. That one difference explains most of the price, the weight and how each one is cared for.
Woven in Gujarat: Patola, Mashru, Tangaliya, Bhujodi
Patola
Patan Patola is a double ikat silk: both the warp and the weft threads are tied and dyed to the pattern before a single thread is woven, then lined up on the loom so the colours meet exactly. The result looks the same on both sides. Patan is the only centre in India still following the traditional double ikat method, and the Salvi community is closely tied to it. Tying and dyeing the threads takes months, and the weaving can take several months more, sometimes close to a year, so a Patan patolu usually costs well over ₹1 lakh, often ₹2 lakh or more (roughly, as of 2026). Rajkot Patola is mostly single ikat, in silk and cotton, and is far more affordable. Our Patola saree guide covers motifs, the Patan and Rajkot difference and buying in detail.
Mashru
Mashru is a satin weave with silk on the face and cotton on the reverse, so the cloth shines outside and stays soft against the skin. It is woven on pit looms, often with ikat stripes, in Patan, Mandvi and Surat. It was long used for skirts and cholis by women in Saurashtra and Kutch, and is now woven as sarees and fabric lengths. See Mashru silk sarees for the history and how to recognise the two faces.
Tangaliya
Tangaliya comes from Surendranagar district and is woven mainly by the Dangasia community. The weaver twists a short extra-weft thread around a group of warp threads, which leaves a small raised dot called a daana. Rows of daanas build geometric motifs such as the peacock, date palm and mango tree. It was traditionally worn by women of the Bharwad shepherd community and has been woven as sarees since its revival. Read more in our Tangaliya saree guide.
Bhujodi
Bhujodi is a weaving village about 8 km from Bhuj, where the Vankar weavers once made shawls and blankets for Rabari herders. Motifs are picked in by hand with extra weft on a plain base: triangles such as popati and chaumukh, and rural motifs such as the elephant and the dholak drum. Today the same looms make cotton and wool sarees, many in kala cotton, a rain-fed native cotton. Our Bhujodi saree guide explains the yarns and motifs.
Dyed, Printed and Embroidered: Bandhani, Ajrakh, Kutch Work
Bandhani
Bandhani, also called bandhej, comes from the word for tying. Small points of cloth are pinched up and bound tightly with thread, then the cloth is dyed, lightest colour first. When the threads are opened, each tied point shows as a small dot where the dye did not reach, and the steps are repeated for each colour. Dense, evenly spaced dots are the mark of skilled work. Jamnagar, Bhuj, Mandvi, Porbandar and Rajkot are the main Gujarati centres, and the craft is closely linked to the Khatri community. Gujarati patterns include bavanbagh and rasamandali, with elephants, peacocks and dancing figures. Rajasthan has its own bandhani and leheriya traditions too. Our Bandhani saree guide covers dot names, fabrics and care.
Ajrakh
Ajrakh is hand block printing from Ajrakhpur and Dhamadka in Kutch. The cloth goes through many rounds of printing, resist and dyeing, using a mud resist and a lime resist, with vegetable and mineral dyes, so deep indigo blue and madder red dominate. A piece can be washed up to 20 times and take up to three weeks. The patterns are dense geometric stars and medallions. See our Ajrakh saree guide for the steps and how to tell hand printing from screen printing, and hand block print sarees for block printing across India.
Kutch Embroidery
Kutch embroidery is a group of styles, each tied to a community. Rabari work often uses bold geometric forms and animal themes, Ahir embroidery is known for its mirror work, and Sindhi and Jat styles have their own stitches and colours. Small mirrors, called abhla, are held in place with stitching, and green, indigo, deep red, black, yellow and ivory are the classic colours. On sarees it usually appears on the border and pallu. Our Kutch embroidery saree guide explains each style and what to ask about hand and machine work.
The Bridal Pair: Panetar and Gharchola
In many Gujarati Hindu and Jain families a bride wears two sarees on her wedding day. They mean different things, come from different sides of the family and look quite different.
The gharchola grid is not decorative alone: squares come in ritually meaningful numbers, often multiples of nine, 12 or 52, and are filled with parrots, elephants, dancing women and flowers that stand for fertility, prosperity and joy. Our Gharchola saree guide decodes the grid and motifs, and Panetar saree guide explains the white and red, the border and how families choose one.
GI Status of Each Craft
A GI protects a name tied to a place and a method. It does not cover every saree with a similar look, and a GI for a shawl does not automatically cover a saree woven the same way. The status below is from the official GI registry and government records, checked in November 2026.
Gujarat also holds a GI for Surat Zari Craft, the metallic thread used in many Gujarati wedding sarees. If you are paying a GI premium, ask whether the maker is a registered authorised user and whether the piece carries a GI label or certificate.
What a Gujarati Bride Wears
Families differ, so treat this as the common pattern rather than a rule. A Gujarati wedding usually runs over several days, and each event has its own mood.
For brides outside Gujarat, many add a gharchola as a dupatta over a non-Gujarati bridal saree, or wear a patola for the reception as an heirloom piece. See our bridal saree guide for fabric and budget planning across regions.
What to Wear as a Gujarati Wedding Guest
Guests at a Gujarati wedding have more freedom than the bride, but a few habits are worth knowing. Bright colours are welcome, and many families avoid all-white or all-black outfits on the main wedding day, so if you love white, add a strong coloured border or blouse. For the garba night you will be dancing in circles for hours, so choose a light fabric and a drape that keeps your feet free.
Our wedding guest saree looks and Navratri saree colours guides help with garba-night colours, and the wedding saree collection gathers MAYIN sarees suited to wedding days.
The Seedha Pallu Style
The seedha pallu, or straight pallu, is the Gujarati way of wearing a saree. The pleats sit at the front as in the nivi drape, but instead of going over the left shoulder to fall down the back, the pallu is brought from the back over the right shoulder and spread across the front of the body, so its full design faces outward. That is why Gujarati pallus, from gharchola grids to panetar motifs, carry so much of the work. It suits sarees with a decorated pallu and is the usual choice for the bride. For a comparison with other regional drapes, see saree draping styles.
How to Tell the Real Thing
Many sarees sold as Gujarati are printed copies. A print is not wrong, and it costs far less, but it should be priced and described as a print. These checks help in a shop or when asking a seller for close-up photos.
Ask the seller three things: where it was made, by which technique, and whether a GI label applies. A clear answer to all three is a good sign.
Sarees in This Guide
These MAYIN sarees are not Gujarati crafts. They are lighter alternatives that suit the colours and moods of a Gujarati wedding: reds and maroons for the main day, a leheriya print for the mehendi, yellow for the pithi, and sequins for the reception. Each MAYIN saree is 5.5 m long and 45 inches wide, and delivery in India is free on orders of ₹2,000 and above. You can also browse red sarees.
Main EventBurgundy red pure handloom linen with zari borderPair with Gold, maroon
RubyRed gold sequin pure chiffonPair with Gold, red
AmélieRed floral print pure chiffonPair with Red, gold
Regal Pin DropMaroon red polka dot modal cottonPair with Maroon, gold
Rouge WavesPink leheriya print pure chiffonPair with Pink, gold
On RepeatYellow handloom linen with zari borderPair with Yellow, gold
Main Event is a pure handloom linen with a zari border, at ₹4,499, with a 1 m blouse piece; dry clean. Ruby is a red and gold sequin pure chiffon for the reception, with a 1 m crepe blouse piece; dry clean. Amélie is a light red floral pure chiffon that moves well at garba, with a 1 m crepe blouse piece; dry clean. Regal Pin Drop is a maroon mul modal with a printed dot, not a tie-dye, with a 1 m running blouse piece in the same fabric; gentle cold hand wash. Rouge Waves carries a printed leheriya wave for the mehendi, with a 1 m crepe blouse piece; dry clean. On Repeat is a yellow handloom linen with a zari border for haldi or pithi guests, at ₹4,499, with a 1 m blouse piece; dry clean.
Questions People Ask
What is the traditional saree of Gujarat?
There is no single one. Patola, bandhani and the bridal gharchola and panetar are the best known, with Ajrakh, Tangaliya, Mashru, Bhujodi and Kutch embroidery also made in the state.
What is a Gujarati saree called?
Usually by its craft: patola, bandhani or bandhej, gharchola, panetar. "Gujarati saree" often also refers to the seedha pallu drape, with the pallu spread across the front.
What saree does a Gujarati bride wear?
In many families a white and red panetar for the first rituals, then a red or maroon gharchola from the groom's side for the later rituals.
What is the difference between panetar and gharchola?
Panetar is white or ivory with a red border and comes from the bride's maternal uncle. Gharchola is red or maroon with a zari or dotted grid and, in many families, comes from the groom's side.
Which Gujarati sarees have a GI tag?
Patan Patola, Rajkot Patola, Jamnagari Bandhani, Kutch Bandhani, Gharchola, Kutch Ajrakh, Patan Mashru and Kutch Embroidery, with Tangaliya and Kutch shawls registered as shawls.
Why is Patan patola so expensive?
Both warp and weft are tied and dyed to the pattern before weaving, which takes months for one saree, and the weaving takes months more. As of 2026, roughly, prices are well over ₹1 lakh and often ₹2 lakh or more.
Is bandhani from Gujarat or Rajasthan?
Both. Gujarat's main centres are Jamnagar and Kutch, while Rajasthan has its own bandhej and leheriya. The Khatri community, originally from Sindh, is closely tied to the craft.
Which shoulder is the pallu on in a Gujarati saree?
The right. The pallu is taken from the back over the right shoulder and spread across the front, unlike the nivi drape, where it goes over the left shoulder.
What should I wear to a Gujarati wedding as a guest?
Bright colours such as red, pink, green or yellow, with a light saree for the garba night. Many families avoid all-white or all-black on the wedding day.
What is mashru fabric?
A satin weave with a silk face and a cotton back, woven in Patan, Mandvi and Surat. It shines outside and stays soft against the skin.
Is Rajkot patola the same as Patan patola?
No. Patan patola is double ikat silk, with both warp and weft dyed before weaving. Rajkot patola is mostly single ikat, in silk or cotton, and costs much less.
Share
Keep reading