MAYIN Guides

Kutch Work Saree: A Guide to Kutch Embroidery and Mirror Work

Vintage Wine, a maroon floral printed and embroidered chiffon saree, by MAYIN

A Kutch work saree is a saree embroidered in one of the needlework styles of Kutch, the desert district of western Gujarat, usually with small mirrors called abhla stitched into bright thread. Each style belongs to a community, such as the Rabari, Ahir, Mutwa, Sodha and Meghwal, and you can often tell who made a piece from its stitches, mirror shapes and motifs. This guide explains the main styles, how mirror work is done, the motifs and fabrics, how to tell hand work from machine copies, and how to style and care for a Kutch work saree.

At a glance
Abhlathe small mirrors held in place by a ring of stitches
16+embroidery styles listed for Kutch in its GI application
GI 509the GI Registry record for Kutch Embroidery (Logo)
Dry cleanthe safest care for most mirror work sarees

What Kutch Work Is

Kutch embroidery is not one technique. It is a family of styles made by the many communities who live in Kutch, several of them with roots in Sindh and Rajasthan. The Ministry of Textiles traces it to pastoral communities such as the Rabari, Ahir and Mutwa, and describes it as an essential dowry tradition, with a girl stitching clothes and household pieces for years before her wedding.

Traditionally it was worked on ghagras, cholis, odhnis and dupattas, on quilts and torans, and for some communities on cattle trappings too. The saree is a newer home for it. Today you see Kutch work on saree borders, pallus and blouses, made both by hand in Kutch and by machine elsewhere.

A second, older strand is court work. Accounts of the craft describe mochis, leather workers, who became professional embroiderers at the Bhuj court and worked fine chain stitch with a hooked needle called an aari. That style, often called Mochi or Aari bharat, is quite different from village mirror work, and it is one ancestor of the aari work you see on blouses today.

Not the same as Ajrakh or bandhani
Kutch is also home to two other famous crafts that often travel with Kutch embroidery: Ajrakh block printing and bandhani tie and dye. Both are dyed, not stitched. If a saree is block printed in indigo and madder, read the Ajrakh saree guide. If it is covered in tiny tied dots, read the bandhani saree guide. This guide is about the needlework only.

The Community Styles

The GI application for Kutch Embroidery lists more than a dozen styles. Five names come up most often when you shop for a saree. The table gives the short version; the notes below help you recognise each one.

Five styles to know
StyleWho makes itHow to recognise it
RabariRabari women, a Hindu pastoral communityChain stitch outlines, bold mirrors in many shapes, bright thread on a dark ground
AhirAhir women, a Hindu community of former cowherdsRound or almond mirrors, chain stitch outlines, flowers, birds and animals
MutwaMutwa women, a Muslim community of the Banni grasslandsVery fine stitches with tiny mirrors set inside them
SoofMeghwal women and other communities, many with roots in SindhCounted triangles and diamonds worked from the back, no drawn design
PakkoSodha, Rajput and Meghwal womenDense buttonhole fill, chain stitch outlines, symmetrical florals

Rabari

Rabari work is the boldest and the easiest to spot. Motifs are outlined in chain stitch and filled with buttonhole and herringbone stitch, and mirrors are cut in lozenges, rounds, rectangles, squares and triangles, sometimes teardrops. The designs draw on Rabari mythology and desert life. Rabari women also decorate blouse seams with bakhiya, a fine back stitch. Not every Rabari group uses mirrors: the Debhariya Rabari are known for thread and appliqué work without them.

Ahir

Ahir work is a filling embroidery, or bharat. Designs are first drawn on the cloth in geru, a red ochre, then outlined in sankli, a chain stitch, and filled with herringbone and other stitches. Mirrors are usually round or almond shaped and held by a ring of coloured stitches, often pink, orange or blue. Motifs include flowers, parrots, peacocks, elephants and scorpions, and figures such as Krishna and the milkmaid.

Mutwa

Mutwa work comes from the Banni area of north Kutch. It is known for being tiny: very fine stitches with very small mirrors set within them. Mutwa embroiderers often adapt patterns from neighbouring communities, so the style is recognised more by its scale and fineness than by a fixed set of motifs. Because it is so slow, it usually appears as a small panel, a neckline or a narrow border.

Soof

Soof, also written Suf, is a counted thread embroidery. It is built from small triangles, the suf, combined into diamonds, zigzags and stars. Nothing is drawn on the cloth first. The embroiderer counts the threads and works a satin like stitch from the back of the fabric, so the colour sits on the front in neat, shiny blocks. Soof traditionally decorated a bride’s clothes, and many embroiderers came to Kutch from Sindh after the 1971 war, bringing new elements to the work.

Pakko

Pakko is dense and firm. Motifs are outlined in chain stitch in black, white or yellow and filled closely with buttonhole stitch, which gives a slightly raised, solid surface. Designs are mostly geometric and floral, sometimes with peacocks or scorpions, often in maroon, red, dark green, white and yellow.

Other names you may see
KharekGeometric bands of satin stitch framed by black outlines, often covering a whole panel.
NeranA name usually translated as eyebrow, for its tiny buttonhole stitches, worked in geometric motifs with a few small mirrors.
Aari or MochiFine chain stitch made with a hooked needle, with roots in court work at Bhuj.
JatFine work with tiny mirrors, made by Jat communities.

Abhla: How the Mirrors Are Fixed

Abhla, also called shisha, are the small mirrors that make Kutch work catch the light. A mirror has no hole, so it cannot be sewn through. Instead it is trapped. The GI application describes the method simply: small mirror discs are fixed with closely worked silken thread.

How a mirror is set by hand
1
Place the mirrorThe embroiderer holds a small mirror flat on the cloth where the design needs it.
2
Build a frameShe lays a few long stitches across the mirror, usually two pairs at right angles, to make a grid that holds it down.
3
Close the ringShe works a dense ring of buttonhole or similar stitches around the edge, catching the frame threads and pulling them back so only the centre of the mirror shows.
4
Finish the edgeOuter stitches, such as chain or a thorn like border, set the mirror into the motif around it.

Mirror shapes are a clue to the maker. Rabari work uses many shapes, Ahir work favours rounds and almonds, and Mutwa and Jat work use the smallest mirrors of all. Hand work usually uses small glass mirrors, which can be slightly uneven at the edge. Cheaper work often uses plastic or acrylic discs.

Mirrors also suit blouses. For neckline, sleeve and back placements, see our mirror work blouse designs, which covers stitching a mirror blouse in detail.

Motifs and Colours

Kutch motifs come from the life around the embroiderer: animals she herds, birds near the village, flowers and the patterns of the desert. Sources agree that a piece’s stitches and motifs signal the community that made it.

Common motif families
Birds and animalsparrotpeacockelephantcamelscorpion
Plantsflower butacreeper border
Geometrictrianglediamondchevronstarsquare grid
FiguresKrishnamilkmaid

Colour is just as telling. Red, black, yellow and white dominate older work, often on a red, maroon, black or indigo ground. Pink, green, orange and blue appear in the mirror rings and fillings. Contemporary artisans also work in softer palettes, such as ivory on beige or pastel thread on white, which can be easier to wear to an office or a day function.

Fabrics and Where the Work Sits

Kutch embroidery is traditionally worked on cotton or silk, with cotton, silk or wool thread. On sarees you will mostly find it on these bases.

Common bases for Kutch work
BaseFeelBest for
Cotton or khadiMatte, breathable, holds heavy stitching wellDay functions, festivals, Navratri, office
Cotton silkLight, slight sheen, crisp drapePooja, family functions, festive lunches
SilkSmooth with sheen, richer colourWeddings, receptions, evening events
Chiffon or other light sheersSoft, flowing, very lightParties; work is usually on the border or as patches

Heavy mirror embroidery is weighty. That is why most Kutch work sarees keep it to a few places rather than covering the whole length.

Typical layout
PartWhat you often seeWhy
PalluA wide band or panels of embroidery and mirrorsThe part seen most, over the left shoulder
BorderA running band of small repeats, sometimes stitched on as a separate patchFrames the pleats without stiffening them
BodyScattered small motifs, or noneKeeps the saree light enough to pleat and walk in
BlouseA fully worked blouse, often the heaviest pieceBrings the craft close to the face

Patch borders are common and perfectly good. Strips of hand embroidery are made separately and stitched onto a plain saree. Check that the patch is sewn on neatly and that the saree under it is not puckered.

Hand Kutch Work or a Machine Copy

Kutch style embroidery is widely made by machine, and mirrors can be glued or held by machine stitched rings. Machine pieces can be good value. They are simply a different thing from hand work, and the price should reflect that.

How to tell
Hand Kutch workMachine or print copy
Mirror ringsEach ring slightly different in size and thread count; mirror edges may be unevenEvery ring identical; mirrors perfectly round, often plastic
Back of the clothThread ends and small knots or tails; no backing paperBobbin thread in straight runs, often a white mesh or stiff backing
Stitch sizeSmall variations from stitch to stitchPerfectly uniform, often long satin like stitches
Motif repeatsRepeats vary slightly along the borderExact copies
Mirrors that liftMirror sits under a thread frame; it does not moveGlued mirror can lift at one edge when the cloth is flexed
PrintThread is raised and casts a tiny shadowA printed copy feels flat; any shine is in the ink
Five checks before you buy
Turn the pallu over. Look for hand finished thread ends rather than mesh or paper.
Look at four mirror rings side by side. Small differences are a good sign.
Flex the cloth gently near a mirror. It should stay trapped, not lift.
Run a fingertip over the work. Hand Pakko and Rabari work feel raised and dense.
Ask who made it and where. Sellers of hand work can usually name the community or the group.

For a wider look at reading embroidery of all kinds, from chikankari to sequins, see our embroidered saree guide.

Buying a Kutch Work Saree

Kutch Embroidery is protected as a Geographical Indication. The GI Registry lists Kutch Embroidery (Logo) as application 509, in class 26 for handicrafts, filed by the Office of the Development Commissioner (Handicrafts) in January 2015, with a certificate dated 31 March 2016. A GI protects the name of a craft from a place. It does not tell you that a particular saree was stitched by hand in Kutch, so the checks above still matter.

Price depends mainly on how much is hand stitched. A plain cotton saree with a hand embroidered patch border is at the gentler end. A silk saree with a fully worked pallu in fine Mutwa or Soof work can take many weeks and costs far more. Prices vary widely by seller, so compare several before deciding.

What to ask the seller
Is the embroidery by hand, by machine, or a mix?
Which style is it: Rabari, Ahir, Mutwa, Soof, Pakko or another?
Are the mirrors glass or plastic, and are they stitched or glued?
Is the border worked on the saree or stitched on as a patch?
Is there a blouse piece, and is it embroidered?
Is the thread colourfast, and what care do you recommend?
Start with a blouse
A lighter way into the craft is a Kutch work blouse with a plain saree. You get the mirrors and colour near the face without the weight or cost of a worked saree. For more back and sleeve ideas in thread, see embroidery blouse designs.

Styling a Kutch Work Saree for Festive Wear

Kutch work is already full of colour and sparkle, so it looks best with simple styling. Let one thing lead: the pallu, the blouse or the jewellery, not all three.

Simple rules that work
DrapeA classic nivi with the pallu over the left shoulder, left open or loosely pleated so the mirrors show. For dancing, pin the pallu at the left shoulder, bring its end round your back and under the right arm, and tuck it into the waistband at your right hip.
BlousePlain saree, worked blouse; or worked saree, plain blouse in a colour from the thread. Black, maroon, mustard and indigo are classic.
JewelleryOxidised silver suits Kutch work best. One statement piece, such as large jhumkas or a hasli style necklace, is enough.
FootwearFlat mojaris or Kolhapuris for garba and long evenings; a low block heel for a reception.
HairA low bun or a braid keeps the pallu and back of the blouse visible.
ColourPair dark grounds with one bright accent; pair pastel Kutch work with silver and pearls.
Which Kutch work for which occasion
OccasionPickKeep it
Navratri and garbaCotton saree with Rabari or Ahir mirror workLight, pinned well, flat shoes
Diwali and family poojaCotton silk with a worked palluWarm colours, oxidised or antique jewellery
Wedding guestSilk with Soof or Mutwa panelsFine work, one statement piece
OfficePastel or tone on tone border onlySmall studs, plain blouse

For colour ideas for each night of the festival, see our Navratri saree colours guide.

Washing and Storing Mirror Work

Mirror work needs more care than plain embroidery. Glass can crack under an iron or in a machine, and sharp edges can catch other clothes. Follow the seller’s label first.

Care steps
1
Dry clean when in doubtSilk Kutch work, heavily mirrored pieces and anything with glued mirrors are best dry cleaned. Tell the cleaner it is mirror work.
2
Test cotton firstIf a cotton saree is labelled washable, dab a damp white cloth on a red or black thread. If colour comes off, dry clean.
3
Wash by hand, never by machineCold water, mild detergent, a short soak and gentle pressing. Do not wring or scrub the embroidered parts.
4
Dry in shadeRoll in a towel to remove water, then dry flat or over a line in shade so colours do not fade.
5
Iron around the mirrorsIron from the back over a thick towel on low to medium heat, and keep the iron off the mirrors themselves.
6
Store with a layer betweenFold with soft cotton or acid free tissue over the mirror work so it does not scratch or snag other sarees, and refold every few months.

For general ironing, see how to iron a saree.

Sarees in This Guide

The sarees below are not Kutch work. They are floral embroidered chiffon and mul cotton sarees that give a lighter embroidered look for festive evenings and day functions, and they pair well with a mirror work blouse. Every MAYIN saree is 5.5 m long and 45 inches wide. The Vintage chiffon sarees come with a 1 m crepe blouse piece and are dry clean only. The Gardenalia mul cotton sarees come without a blouse piece and are dry clean only. Delivery in India is free on orders of ₹2,000 and above.

The Vintage chiffon sarees are priced at ₹3,499 and the Gardenalia mul cotton sarees at ₹2,199. Browse all embroidered sarees, or our Navratri sarees. For other regional embroidery, read about Kasuti, phulkari and chikankari.

Questions People Ask

What is Kutch work on a saree?

Kutch work is embroidery from the Kutch district of Gujarat, usually in bright thread with small mirrors called abhla. On sarees it is mostly worked on the pallu, border and blouse.

Which communities do Kutch embroidery?

Many. The best known are the Rabari, Ahir and Mutwa, along with the Sodha, Rajput, Meghwal and Jat communities. Each has its own stitches, mirror shapes and motifs.

What is abhla work?

Abhla, also called shisha, is mirror work. A small mirror is held on the cloth by a frame of stitches and then a dense ring of thread around its edge.

What is the difference between Soof and Pakko embroidery?

Soof is counted from the threads of the cloth and built from small triangles worked from the back. Pakko is drawn first and filled densely with buttonhole stitch inside chain stitch outlines.

How many types of Kutch embroidery are there?

More than a dozen. The GI application speaks of sixteen styles, including Ahir, Aari, Soof, Kharek, Neran, Pakko, Jat and Rabari.

Does Kutch embroidery have a GI tag?

Yes. The GI Registry lists Kutch Embroidery (Logo) as application 509, a handicraft Geographical Indication with a certificate dated 31 March 2016.

How can I tell if Kutch work is handmade?

Turn it over and compare the mirror rings. Hand work has slightly uneven rings, small differences between repeats and no mesh backing. Machine work is perfectly uniform and mirrors are often plastic or glued.

Is Kutch work the same as Ajrakh or bandhani?

No. All three come from Kutch, but Kutch work is embroidery, Ajrakh is block printing and bandhani is tie and dye.

Can you wash a mirror work saree at home?

Only cotton pieces labelled washable, by hand in cold water with mild detergent. Silk, heavily mirrored or glued pieces are best dry cleaned.

How do you iron a Kutch work saree?

Iron from the back over a thick towel on low to medium heat and keep the iron off the mirrors, which can crack or lift.

What blouse goes with a Kutch work saree?

A plain blouse in a colour from the embroidery thread, such as black, maroon or mustard. With a plain saree, a Kutch work blouse can carry the whole look.

Is a Kutch work saree good for Navratri?

Yes, a light cotton saree with Rabari or Ahir mirror work is a classic choice. Pin the pallu securely and wear flat shoes for garba.

All guides