MAYIN Guides

Patola Saree Guide: Double Ikat of Patan, Motifs, Price and How to Spot the Real One

Line drawing of a Patan patola saree laid flat: red body with a repeating jewel square grid, yellow borders with elephants and parrots, and a pallu end piece with coloured bands, a row of triangles and flowers

A patola saree is a silk saree from Patan in north Gujarat, woven in double ikat: both the lengthwise (warp) and crosswise (weft) threads are tied and dyed in the pattern before a single thread goes on the loom. Because the colour is in the yarn itself, the design looks the same on both faces, and that is the quickest way to tell a true Patan patola from a single ikat or a print. This guide explains how double ikat works, how a patola is laid out, what the common motif names mean, the GI tag, what a real one costs as of 2026 and how to check one before you buy.

At a glance
Double ikatwarp and weft both tie-dyed before weaving
Patanthe north Gujarat town that gives the saree its name
GI 2013Patan Patola registered as a geographical indication
Monthsone saree takes several months, often six or more

What a Patola Saree Is

Patola (singular patolu) are silk textiles made in double ikat and named after Patan, the old capital town in north Gujarat where they are still woven. The arts encyclopedia MAP Academy describes Patan as the only Indian centre that still follows the traditional patola technique. The Victoria and Albert Museum notes that genuine patola are made only by the Salvi community, today in Patan.

Most patola are saree lengths, usually about six yards, in deep reds, greens, yellows, white and black, with a geometric body, a figured border and a patterned end piece. They have long been treated as some of the most auspicious textiles in western India, worn at weddings and religious occasions and kept as family heirlooms.

You will also see the word patola used loosely for any saree with an ikat-style pattern. In the market today it can mean three very different things: a Patan double ikat silk, a single ikat silk from the Rajkot area, or a printed fabric copying the look. Knowing which one you are holding is the whole point of this guide.

Three words worth knowing
IkatA resist dye method: bundles of thread are tightly tied so dye cannot reach those parts, then dyed. The pattern exists before weaving.
Single ikatOnly one set of threads, usually the warp, carries the pattern. The other set is a plain colour.
Double ikatBoth warp and weft carry the pattern and must meet exactly in the loom. This is the Patan patola.
PatoluThe singular. Patola is the plural, though most people use patola for one saree too.

How Double Ikat Is Made

Every motif on a patola is planned thread by thread. Museum accounts describe the binders marking a grid on the stretched threads, then tying small sections tightly with cotton so the dye cannot get in. Areas that must stay white are tied first. The threads are dyed, some ties are opened and others added, and the threads are dyed again, colour by colour, in a careful order. The same work is done separately for the warp and for the weft.

From thread to saree, in outline
1
Plan on a gridThe design is worked out so each colour falls on exact threads in both directions.
2
Mark and tieBundles of silk are stretched, marked and tied with cotton wherever the dye must not reach.
3
Dye in sequenceLightest areas are protected first; ties are opened and added between dye baths until every colour is in place.
4
Repeat for the weftThe crosswise threads are tied and dyed to the same plan, so they can meet the warp pattern.
5
Set the warpThe dyed warp threads are laid on the loom in sequence so the design lines up.
6
Weave and alignTwo weavers work together, nudging each weft thread into line with the warp so the colours meet. Reports give about 8 to 9 inches of cloth a day.

That last step is why double ikat is so slow. A news explainer on the craft reports that tying and dyeing the warp and weft for one six-yard saree alone takes three to four months, and the full saree takes several months, often six or more and sometimes a year. Patola have long been coloured with plant dyes such as indigo and turmeric, but dyes can vary from one workshop to another, so ask what was used.

Why the edges look stepped
Ikat outlines are built on a grid of tied threads, so curves become small steps. A slight softness at the edges, where a thread has shifted a little, is normal in handwoven ikat and is one sign that the pattern is in the yarn, not printed on top.

The Layout: Body, Border and Pallu

A classic patola has three zones. The body (the field) repeats one motif across a grid, often in rows of diamonds or lozenges. The borders along both long edges carry figures such as elephants, parrots, flowers or dancers. The end piece (pallu) is set off with coloured bands and often a row of triangles, known as tumpal, especially on pieces made for Indonesia.

Line drawing of a Patan patola saree laid flat: red body with a repeating jewel square grid, yellow borders with elephants and parrots, and a pallu end piece with coloured bands, a row of triangles and flowers
The three parts of a patola: a body with one motif repeated on a grid, borders with figures such as elephants and parrots, and a patterned end piece.
What to look at in each zone
ZoneUsually showsWhat to check
BodyOne motif repeated on a diamond grid: jewel squares, flowers, leaves or basketsDo the repeats line up across the width, and look the same on the reverse?
BorderElephants, parrots, dancers, flowers, or a simple stripeAre figures crisp at small size? In print they are sharper; in single ikat softer
End pieceBands of colour, a row of triangles, small flowersIs the end piece woven in, not a separate panel stitched on?

Compare this with the woven layouts in our Banarasi saree guide or Paithani saree guide. Those sarees use extra threads or tapestry to add the motif. A patola has no extra pattern thread at all: every colour is dyed into the warp and weft before weaving.

Patola Motifs and What They Mean

Patola designs are known by name, usually with the word bhat (design) after them. Different communities historically chose different designs, so the motif often told people something about the wearer. The names below appear in government, museum and textile research sources.

Eight simplified patola motifs drawn with stepped ikat edges: ratan chowk jewel square, nari kunjar dancers and elephants, popat kunjar parrots and elephants, chhabadi basket, pan leaves, vohra gaji rows of gems with stars, phul flower and end piece triangles
Common patola motif names and what they show. The stepped outline comes from tying and dyeing threads on a grid.
Common patola designs
DesignWhat it showsAssociated with
Ratan chowk bhatA field of lozenges, the jewel square or jewel mosaic, often with elephant and parrot bordersWidely made; one of the best known
Nari kunjar bhatDancing women and elephants set in a lozenge fieldHindu and Jain families
Popat kunjarParrots (popat) and elephants (kunjar)Hindu and Jain families
Pan bhatLeaf shapes like the betel leaf, with figured bordersHindu and Jain merchant families
Chhabadi bhatA basket design, sometimes with temple motifsBrahmin families of the Surat area
Vohra gaji bhatRows of gem-like shapes with leaves, creepers and stars; no figuresThe Vohra (Bohra) Muslim community
Phul and panchphulSingle or five-petalled flowersMany families

Patola with human and animal figures were usually made for Hindu and Jain families, while the purely geometric and floral designs such as vohra gaji were made for Muslim families. Patola were also made for export, especially to Indonesia, and some elephant and grid designs were made for that market.

Quick motif glossary
Animals and peopleKunjar: elephantPopat: parrotNari: woman
PlantsPan: leafPhul: flowerPanchphul: five flowersAkhrot: walnut
GeometryChowk: squareRatan: jewelChokta: boxLaheriya: wave stripes

GI Tag, History and the Salvi Weavers

Patan Patola received a geographical indication (GI) tag in 2013. A GI ties the name to the place and the traditional method, so a saree woven elsewhere, or made in a different way, should not be sold as Patan Patola. Our guide to the Silk Mark and Handloom Mark explains how GI, Silk Mark and Handloom Mark differ and what each label does and does not promise.

The Salvi weavers trace their history to Jalna in Maharashtra. A popular account says a Solanki king, Kumarapala, brought hundreds of Salvi families to Patan; historians treat this as tradition rather than a recorded fact. The earliest firm evidence for Patan patola comes from European travellers in the sixteenth century.

Patola were prized far beyond Gujarat. They were traded to Southeast Asia, where the Dutch East India Company gave them as gifts to rulers, and in the Javanese courts only royalty and the nobility could wear them. Their designs were copied in Indonesian textiles and patola patterns appear in palace murals in Kerala. The trade to Indonesia fell sharply after the Second World War.

The weavers today
Today only a handful of Salvi families in Patan still weave double ikat patola, and reports differ on the exact number. Pieces are often made to order, so waiting times can be long.

Patan, Rajkot and Printed Patola

Most sarees sold as patola are not Patan double ikat. That is not always a problem, as long as you know what you are paying for. Rajkot and Surendranagar districts weave single ikat patola, where only the warp is tie-dyed and the weft is plain. Single ikat patola are also woven in Pochampally in Telangana, in cotton and silk.

Three pairs of fabric swatches comparing front and back: double ikat with a crisp motif the same on both sides, single ikat with shifted edges and softer colour, and a print with a pale back
Turn the saree over. A double ikat looks the same on both faces; a print is paler on the back.
Three kinds of patola in the market
TypeHow it is madeWhat you see
Patan double ikatWarp and weft both tie-dyed; woven by hand in PatanSame design and colour on both faces; slightly stepped edges; very high price
Rajkot single ikatWarp tie-dyed, plain weft; often with a zari border or palluPattern softer along one direction; reverse similar to the front; far lower price
Printed patolaPatola-style pattern printed on woven cloth, often a blendEven, sharp edges; reverse paler or blank; lowest price

Odisha has its own ikat tradition, called bandha, with very different motifs such as the conch and wheel. We cover it in our Sambalpuri saree guide.

How to Identify a Real Patola

No single test is perfect, and a skilled single ikat can look close at first glance. Use several checks together, and buy a Patan double ikat only from the weavers themselves or a seller who can show where and by whom it was woven.

Checks before you buy
Turn it over. In double ikat the reverse matches the front in colour and design. A print is paler or blank on the back.
Look at the edges of a motif. Ikat edges are slightly stepped or soft. Perfectly sharp outlines suggest print.
Look along both directions. In single ikat the pattern blurs mainly along one direction, and the cross threads are one plain colour.
Check the border and end piece. In a patola they are part of the same woven cloth, not stitched on.
Feel the fabric. A Patan patola is silk. Many lower priced copies are blended or synthetic.
Ask about the GI. Ask who wove it, in which town, and whether it is sold as Patan Patola under the GI.
Weigh the price. A double ikat that takes months to weave cannot be sold for a few thousand rupees. If the price is low, it is single ikat or print.

For a broader method to check any silk, including the burn test and its limits, see types of silk sarees.

Patola Saree Price and Why It Costs So Much

Price follows the method. A Patan double ikat is among the most expensive handwoven textiles in India because of the months of tying, dyeing and slow weaving behind it. The figures below are approximate, as of 2026, and vary with size, design, silk and dyes.

Approximate patola prices, as of 2026
TypeRough priceWhy
Patan double ikat sareeRoughly ₹1 lakh to several lakh, more for intricate piecesBoth warp and weft tie-dyed; several months per saree; often made to order
Rajkot single ikat silkA fraction of a Patan piece; varies widely with silk and zariOnly one set of threads tie-dyed; quicker to weave
Printed patola styleThe lowest of the threePattern printed, no tie-dyeing

For how weave, fibre and time shape the price of any saree, see our saree price guide.

When to Wear a Patola and How to Style It

In Gujarat a patola is auspicious, but it is not the usual bridal saree for every community. It has long been worn by the mother of the groom or bride, given as a wedding gift, and in some families draped by the bride as an odhani. For the classic red and white Gujarati bridal saree, see our panetar saree guide.

Styling a patola
BlousePick one colour from the motif, often red, green or yellow. A plain silk blouse lets the pattern lead.
JewelleryGold or kundan suits the bold colours. Keep it to one statement piece if the saree is busy.
DrapeA standard nivi drape shows the end piece over the left shoulder; a Gujarati seedha pallu shows it across the front.
OccasionsWeddings, pujas, Navratri and family functions. Single ikat patola also suit festive office days.

If you are new to draping, our how to wear a saree guide walks through the nivi drape step by step, and saree draping styles covers other regional drapes.

Caring for a Patola Saree

Treat a silk patola as an heirloom. Double ikat colour runs right through the yarn, so it holds up well, but silk still dislikes water, sun and folds held for years.

Care basics
Dry clean only, and tell the cleaner it is a handwoven silk ikat.
Air it in shade after wearing before you fold it away.
Store wrapped in soft cotton cloth, not plastic, away from damp walls.
Refold along different lines every few months so creases do not weaken the silk.
Iron on the reverse on a low silk setting, with a cotton cloth between.

Lighter Handwoven Sarees for Everyday

A Patan patola is a once-in-a-lifetime purchase. For everyday wear with a similar love of colour, pattern and handwork, these MAYIN sarees are a lighter alternative. They are not ikat. Every MAYIN saree is 5.5 m long and 45 inches wide, and delivery in India is free on orders of ₹2,000 and above.

The Corner Office and Crosswalk are pure handloom linen with geometric checks and stripes, ₹4,499 each, with a 1 m blouse piece; dry clean. Manjari brings patola red in mul cotton with zari stripes, without a blouse piece; dry clean. Rouge Waves is a leheriya print on pure chiffon with a 1 m crepe blouse piece; dry clean. For handloom work, Lilac Bloom is an Original Dhakai jamdani and Miss Earth Tissue Saree a handloom tissue; neither has a blouse piece, and both are dry clean.

Browse more in handloom sarees and linen sarees, or read our handloom saree guide.

Questions People Ask

What is a patola saree?

A silk saree from Patan in Gujarat woven in double ikat, where both warp and weft threads are tie-dyed to the pattern before weaving. The design looks the same on both sides.

Why is patola saree so expensive?

Every thread is tied and dyed by hand in both directions, and two weavers align each weft thread as they go, weaving only about 8 to 9 inches a day. One saree takes several months, often six or more.

What is the price of an original Patan patola saree?

As of 2026, roughly ₹1 lakh upwards, and several lakh for intricate pieces. Anything priced in the low thousands is single ikat or print.

How can I identify an original patola saree?

Turn it over: a double ikat looks the same on both faces, with slightly stepped edges. Then ask who wove it and where, and check that the price matches months of handwork.

What is the difference between Patan patola and Rajkot patola?

Patan patola is double ikat, with both warp and weft tie-dyed. Rajkot patola is usually single ikat, with only the warp tie-dyed and a plain weft, so it is quicker to make and far cheaper.

Does patola have a GI tag?

Yes. Patan Patola received a geographical indication tag in 2013, linking the name to Patan and the traditional double ikat method.

How long does it take to make a patola saree?

Tying and dyeing the threads for one saree takes about three to four months, and the full saree usually takes several months, often six or more and sometimes a year.

Who makes Patan patola?

The Salvi community of Patan, who trace their history to Jalna in Maharashtra. Only a handful of families still weave it.

Is patola silk or cotton?

A Patan patola is silk. Single ikat patola-style sarees are woven in both silk and cotton, and prints come in many fabrics.

Can a bride wear a patola saree?

Yes, though in many Gujarati families patola is worn more often by the mothers of the couple, given as a wedding gift or draped as an odhani. The red and white panetar is the more common bridal saree.

How do you wash a patola saree?

Do not wash it at home. Dry clean only, air it in shade after wearing and store it in soft cotton.

All guides