Bandhani Saree Guide: Tie and Dye Process, Motifs, GI Tag and Care
By Nishita Nathani19 min read
A bandhani saree is a saree patterned by tie and dye: tiny points of cloth are pinched, bound tightly with thread and dipped in dye, so each tied point stays undyed and opens into a small dot. It comes mainly from Gujarat, especially Kutch (Kachchh) and Jamnagar, and from Rajasthan, where it is often called bandhej. This guide explains how the dots are made, what the common patterns are called, what the Kutch Bandhani and Jamnagari Bandhani GI tags mean, how to tell hand tied work from a print, and how to look after one so the colours last.
What Is a Bandhani Saree
Bandhani is a resist dyeing craft. The word comes from the Sanskrit root bandh, to tie. Instead of drawing a pattern on the cloth with colour, the artisan protects the parts that must stay light. Each protected point is a tiny pinch of fabric wound with thread. When the cloth goes into the dye bath, the dye cannot reach under the thread, and the point stays the colour it was before.
The result is a field of dots, each one a small pale ring, often with a speck of colour at its centre where the very tip of the pinch took some dye. Hundreds or thousands of these dots, grouped and spaced by hand, build up the whole design: borders, flowers, animals, medallions and grids. The same craft is also known as bandhej, bandhni and, in parts of Gujarat and Rajasthan, simply by the name of the garment, such as a gharchola or a peeliya.
Bandhani belongs to a wider family of Indian dyed and printed sarees. If you want the bigger picture, our guide to dyed sarees sets bandhani beside leheriya, ikat and block printing.
Where Bandhani Comes From
Bandhani is old. Dotted tie dyed garments are usually traced to the Ajanta cave paintings, dated to around the 6th century, and the 7th century courtly text Harshacharita describes tied textiles at a royal wedding. In western India the craft is strongly linked to the Khatri community of Kutch and Saurashtra, who are dyers by tradition. Community memory holds that the Khatris brought the craft into Kachchh from Sindh, and from there it spread to Jamnagar.
Bandhani has always been tied to the life events of the communities that wear it. A Gujarati bride often wears a gharchola, a red bandhani with a woven zari grid, and among Muslim communities of Kutch the bridal piece is the chandrokhani. In Rajasthan, a yellow ground saree with a red border, the peeliya, is given to a woman by her natal family after childbirth. Our guides to the peeliya saree and the panetar saree cover those two traditions in detail.
How Bandhani Is Tied and Dyed
The process below follows the description in the Jamnagari Bandhani GI application, filed with the GI Registry. Details vary from workshop to workshop, but the order is always the same: mark, tie, dye light, tie more, dye darker, open.

Tying is the slow part. The GI file gives tying times from 4 to 90 days for one piece, depending on the design, with fine, dense designs at the long end. Artisans are often paid by the number of kadi they tie, which is why fine, dense dots cost more than large, widely spaced ones.
Parts of a Bandhani Saree
A bandhani saree does not have woven parts in the way a silk saree does. Its body, border and pallu are all made by tying and dyeing, so the designer has to plan every colour change before the first dye bath. The drawing shows a classic layout: a red body with dots in groups of four, green borders with a single row of dots, and a yellow pallu with a dotted medallion.

Not every bandhani has a separate border. Many everyday cotton bandhani sarees are a single colour with dots all over, which makes them easy to wear and easy to match. Festive pieces add colour blocks, a contrast pallu and zari.
Bandhani Dot Patterns and Motifs
Every bandhani design starts from the single dot. Grouping dots, varying their size and arranging them into lines gives a surprisingly large vocabulary. The names below come from craft sources in Kutch and Jamnagar; you will hear them in shops and workshops.

Bigger pieces combine these into named layouts such as chandrakala and bavan bagh. Bavan bagh, meaning 52 gardens, divides the cloth into 52 squares, each filled with a motif. A gharchola with 12 squares is called bar bagh. Elephants, peacocks, parrots, lotus flowers and dancing figures are all common, and older museum pieces from Jamnagar show a circle of dancers placed so it falls across the wearer's back.
The GI Tags: Kutch Bandhani and Jamnagari Bandhani
A geographical indication (GI) is a legal label under India's Geographical Indications of Goods Act. It ties a product's name to the place and community that make it, so the name cannot be freely used for goods made elsewhere or in another way. Bandhani from Gujarat now has two registered GIs, and the closely related gharchola has a third.
What does the tag mean for you as a buyer? It means "Kutch Bandhani" and "Jamnagari Bandhani" refer to hand tied work made in those places by the traditional method. It does not mean every saree sold with the word bandhani on it is GI registered work. A printed dotted saree can still be sold as a "bandhani print"; it simply is not tied. Ask the seller where the piece was tied, and look for an authorised user label or certificate when you are paying for GI work.
Bandhani Fabrics and Colours
Bandhani needs a cloth that takes dye evenly and holds a tie. According to the Jamnagari Bandhani GI file, the craft is done on cotton, silk and wool. For sarees, the common bases today are cotton (often fine mul or malmal), gajji silk (a lustrous satin weave silk long used in Jamnagar), georgette and chiffon, with modal silk and crepe also seen.
Colour has meaning in bandhani. Red is the colour of marriage, yellow is linked with spring, birth and new beginnings, and green and blue are common festive grounds. Traditional dyes were plant based, such as madder for maroon and turmeric for yellow; most bandhani today uses synthetic dyes, which are brighter and more consistent.
How to Identify Real Bandhani
The quickest test of a bandhani is to turn it over. Hand tied dots go right through the cloth, while a print sits mostly on one face. No single test is perfect, so use several together.
There is nothing wrong with a printed dotted saree, as long as it is sold as a print. It is lighter on the purse and often easier to wash. The point is to know what you are paying for. If you love the look of dots for daily wear, our polka dot styling guide has ideas that work just as well.
What Sets the Price of a Bandhani Saree
Bandhani prices vary very widely, from inexpensive printed cotton to wedding silk that took months to tie, so it is more useful to know what drives the price than to rely on a single figure.
Wearing Bandhani: Occasions and Blouses
Bandhani covers a very wide range, from cotton for a summer day to red gajji silk for a wedding. Its busy surface means the rest of the look should usually stay simple.
For blouses, the safest choice is plain fabric in a colour taken from the saree: the border, the pallu or the dot colour. A red bandhani with a green pallu looks right with a green blouse; a yellow peeliya often takes red. Many festive bandhani sarees are paired with a mirror work or zari blouse, but keep the neckline simple so the dots stay the focus. Our saree colour combinations guide helps with exact pairs. For Navratri day colours, see the Navratri saree colours guide.
How to Care for a Bandhani Saree
Bandhani colours are bright and, especially in the first few washes, can run. Silk and festive pieces are best dry cleaned. Cotton bandhani can usually be washed at home with care. Always follow the seller's label first.
For more on washing and storing different fabrics, see how to wash cotton, chiffon and linen sarees.
Lighter Dotted Sarees for Everyday Wear
If you like the dotted look for daily wear and want something light and easy to wash, the sarees below are printed polka dots and one leheriya print, not tied bandhani: a sensible, lighter alternative for everyday. Every MAYIN saree is 5.5 m long and 45 inches wide. Regal Pin Drop, Moonlit Pearl and Vintage Speckle are mul modal, with a 1 m running blouse piece in the same fabric, and take a gentle cold hand wash. The Nude Dot and Spot On are mul cotton, without a blouse piece, and also take a gentle cold hand wash. Rouge Waves is a leheriya print on pure chiffon with a 1 m crepe blouse piece, and is dry clean only. Free delivery in India on orders of ₹2,000 and above.
Regal Pin DropMaroon red polka dot modal cottonPair with Gold, white, black
Moonlit PearlWhite polka dot modal cottonPair with Red, black, navy
Vintage SpeckleDusty rose pink polka dot modal cottonPair with Maroon, white, silver
The Nude DotBeige polka dot mulmul cottonPair with Black, maroon, gold
Spot OnCharcoal polka dot mulmul cottonPair with White, pink, silver
Rouge WavesPink leheriya print pure chiffonPair with Purple, gold, pink
You can see more in the polka dot sarees collection.
Questions People Ask
What is a bandhani saree?
It is a saree patterned by tie and dye. Tiny points of cloth are tied tightly with thread before dyeing, and each tied point stays undyed, opening into a small dot.
Which state is bandhani from?
Mainly Gujarat, especially Kutch and Jamnagar, and Rajasthan. Gujarat holds the two registered GIs, Kutch Bandhani and Jamnagari Bandhani.
What is the difference between bandhani and bandhej?
They are two names for the same tie and dye craft. Bandhani is more common in Gujarat and bandhej in Rajasthan.
What is the difference between bandhani and leheriya?
Bandhani ties tiny individual points to make dots. Leheriya rolls the cloth diagonally and ties it at intervals to make waves or stripes.
Does Kutch bandhani have a GI tag?
Yes. Kutch Bandhani was registered on the GI Registry with certificate no. 576 dated 30 March 2024. Jamnagari Bandhani was registered earlier, with a certificate dated 10 November 2016.
How can I tell if a bandhani saree is real?
Turn it over: hand tied dots show clearly on the back. Real dots are slightly uneven, often have a tiny dyed centre, and new pieces feel crinkled rather than flat.
How long does it take to make a bandhani saree?
Tying alone takes from about 4 to 90 days depending on the design, according to the Jamnagari Bandhani GI file. Fine, dense designs sit at the long end of that range.
What fabric is used for bandhani sarees?
Cotton, gajji silk, georgette, chiffon and modal silk are the most common bases. Gajji silk is the traditional choice for wedding pieces.
What is a gharchola saree?
A Gujarati bridal saree, usually red or maroon, with a woven zari grid. Each square is filled with tied and dyed motifs. A 12 square grid is bar bagh and a 52 square grid is bavan bagh.
Can I wash a bandhani saree at home?
Cotton bandhani can usually be hand washed alone in cold water with mild detergent, without wringing, and dried in shade. Silk, georgette and zari bandhani are best dry cleaned.
Why does bandhani lose its crinkle?
The crinkle comes from the ties and relaxes with wear, washing and ironing. That is normal; the dots stay. Twisting the saree while damp and skipping the iron keeps more texture.
Which blouse goes with a bandhani saree?
A plain blouse in the border, pallu or dot colour is the safest pairing. Mirror work or zari blouses suit festive bandhani if the neckline is kept simple.
Share
Keep reading