Rajasthani Sarees: Leheriya, Bandhej, Kota Doria, Gota Patti and Block Prints
By Nishita Nathani18 min read
A Rajasthani saree is not one weave but a family of crafts: tie-dyed leheriya and bandhej, the woven checks of Kota doria, the gold ribbon work called gota patti, and the hand block prints of Sanganer, Bagru and the mud resist known as dabu. Most of them are surface crafts, done by hand on a light cotton, silk or chiffon base, which is why they suit the heat and the bright festival colours of Rajasthan. This guide sets the crafts side by side: where each comes from, how to tell one from another at a glance, which ones hold a GI tag on the official register, how the saree sits beside the traditional poshak, and what families wear for Teej and Gangaur. Each craft has its own full guide, linked as we go.
What Counts as a Rajasthani Saree
When people search for a Rajasthani saree they usually mean one of three things. The first is a craft: a saree that is tie-dyed, block printed, woven or embellished in a way that belongs to a particular Rajasthani town. The second is a look: bright reds, yellows, pinks and greens, waves and dots, and a touch of gold at the border. The third is a festival saree, the one worn for Teej, Gangaur or a family wedding in Jaipur or Jodhpur.
It helps to know that the saree is only part of Rajasthan's dress history. The older women's costume is the poshak, a skirt, bodice and long veil cloth, and many of the crafts in this guide were first made for odhnas and men's turbans before they were used for sarees. Today you will find each craft on sarees as well, often on cotton, cotton silk, georgette or chiffon.
Because these crafts are made on top of a base cloth, the same craft can appear on very different sarees. A leheriya can be dyed on fine cotton or on silk; gota patti is stitched onto georgette, cotton or silk. So when you shop, ask two questions: which craft is it, and what is the base fabric.
The Crafts at a Glance
This table is the quick reference. The centres named are the ones textile writers and craft bodies most often list; each craft is practised in more places than these.
Leheriya, Mothra and Bandhej
Rajasthan's two tie-dye crafts work on the same principle. Thread is bound tightly around parts of the cloth so the dye cannot reach them, and those protected parts become the pattern. What changes is how the cloth is tied.
In leheriya, the stripe width depends on how thick the binding is and how far apart it is tied. Multicolour leheriya is built in rounds: the roll goes into the lightest bath first, some bindings are opened and new ones tied, then it goes into a darker bath. When the cloth is rolled again on the other diagonal and redyed, the stripes cross and the result is mothra. Our full leheriya saree guide covers the steps, the named patterns and how to judge a piece.
Bandhej is the Rajasthani name for what Gujarat calls bandhani. The size and closeness of the dots, the number of colours and the base fabric all change the price. The bandhani saree guide explains the dot patterns, the Gujarat GIs and how to check a piece.
Kota Doria, the Woven Check
Kota doria is the one major Rajasthani saree craft that is woven rather than dyed or printed. It comes from Kaithoon and nearby villages such as Siswali and Mangrol, in the Kota area of the Hadoti region. It is woven on pit looms with a throw shuttle, and the cloth is light enough to see through.
Its signature is the khat, a small square check. Each khat is usually made from a mix of cotton and silk yarns, often described as eight cotton and six silk. The cotton gives the cloth its sheer, airy quality, while the silk gives it strength and a slight sheen. Weavers have traditionally strengthened the warp with a paste that includes onion juice and rice. The cloth is also known as Kota Masuria, a name that tradition links to weavers brought from Mysore in the seventeenth century.
Kota doria is also a popular base for other crafts. You will find it block printed, tie-dyed in leheriya, or finished with gota patti. The Kota doria saree guide goes into weaving, the GI, the cotton and silk blends and how to spot a mill made copy.
Gota Patti, the Ribbon Work
Gota is a woven metallic ribbon. In gota patti work it is cut, folded into leaves, flowers, birds or borders, and stitched onto the saree, so the gold or silver sits on top of the cloth instead of being woven into it. Gota ribbon is made in Jaipur and nearby places such as Nyla and Khandela, and the stitching is done in Jaipur, Ajmer, Bikaner and Udaipur among other towns.
Traditional gota was made with real gold or silver wire. Most gota today is lurex, a metallised polyester film, which is lighter, does not tarnish and costs much less. Both are genuine gota work; the difference is the material and the price, so it is fair to ask which one you are being sold.
Gota patti is the classic way to add gold to a leheriya, bandhej or Kota doria saree for a festival. The gota patti saree guide covers the ribbon types, the shapes, base fabrics and care in full.
Sanganeri, Bagru and Dabu Prints
Rajasthan's block printing towns sit close together around Jaipur, yet their sarees look quite different. Printers carve designs into wooden blocks, dip them in dye or paste and press them onto the cloth by hand, one impression at a time. Our hand block print saree guide explains the full process; here is how the three Rajasthani styles differ.
Dabu, the Mud Resist
Dabu is a resist print. Instead of printing colour, the printer stamps a paste of mud or clay, lime and gum onto the cloth, often with wheat chaff mixed in, and usually sprinkles sawdust over it so it does not smudge. The cloth is then dyed, most often in indigo, and the paste is washed away to leave pale motifs on a dark ground. As the dried mud cracks, a little dye seeps in and leaves fine veins, a little like batik but made with mud instead of wax.
Akola in Chittorgarh district is usually named as the home of dabu, with bolder, earthy designs. Bagru printers use it for finer motifs, and Pipar in Jodhpur district is known for dense prints and indigo vat dyeing. When the process is repeated in layers, the result is called double or triple dabu, with more shades of blue.
Which Rajasthani Crafts Have a GI Tag
A Geographical Indication protects the name of a product made in a particular place. We checked each craft on the official GI registry in November 2026. Four of the crafts in this guide are registered.
Two points are worth keeping in mind. The bandhej GI is specific to Jodhpur; it is separate from the Gujarat registrations for Kutch and Jamnagari bandhani. And a GI protects a name and a place, not a single saree: it does not prove that the piece in front of you was hand printed or hand tied. You still check the cloth, the seller and the bill. If you read that leheriya or dabu has its own GI, look it up on the registry first, as we could not find one.
The Poshak and the Odhna
The poshak is the traditional dress of Rajput women, and it is not a saree. It is a set: a full ghaghra skirt made of many panels, a short fitted bodice called the kanchli, a longer kurti over it, and the odhna, a long veil cloth draped over the head and upper body. The odhna carries most of the decoration, and it is often leheriya or bandhej, finished with gota.
The two share the same crafts and colours, which is why the poshak shapes what people picture when they say Rajasthani saree. A saree with a leheriya body and a gota border is, in a sense, the odhna's look spread over a full drape. If you prefer the structure of a skirt with the ease of a saree, our guide to lehenga saree draping shows how to drape a saree that way.
Teej, Gangaur and Other Occasions
Rajasthan's festival calendar is where these crafts are seen at their brightest. Customs vary from family to family, so treat this as a guide to what is common rather than a set of rules.
For Teej, our Teej saree guide gives the dates and colours for Hariyali, Kajari and Hartalika Teej. For Gangaur, the Gangaur saree guide covers the festival calendar, the Jaipur and Udaipur processions and what to wear for the final puja. If you are dressing for the Gangaur procession, choose a light saree, secure the nivi pallu on the left shoulder with a pin, and wear flat footwear.
How to Buy and Care for One
The questions are the same whichever craft you choose: what is the craft, what is the base fabric, and was it done by hand. A good seller will answer all three plainly. Prices rise with the work involved: more colours in a leheriya, finer and closer dots in a bandhej, real metal in gota, silk rather than cotton in the base, and natural dyes in a block print.
For washing cotton and chiffon sarees in general, our guide on how to wash cotton, chiffon and linen sarees has the step by step method.
Sarees in This Guide
These MAYIN sarees are not Rajasthani crafts. They are lighter alternatives in the colours and patterns of a Rajasthani festival wardrobe: a leheriya print, festival reds and greens, and handloom stripes with a touch of zari. Every MAYIN saree is 5.5 m long and 45 inches wide.
Rouge Waves is a pink leheriya wave printed on pure chiffon, with a 1 m crepe blouse piece; it is a print, not tie-dye, and is dry clean only. Emerald, in green handloom mul cotton with zari stripes, suits Hariyali Teej, and Manjari gives the red of Gangaur in the same easy cotton. Both come without a blouse piece and are dry clean. For a festive evening, Ruby brings red and gold on pure chiffon, with a 1 m crepe blouse piece; dry clean.
Rouge WavesPink leheriya print pure chiffonPair with Green, gold
EmeraldGreen striped mul cotton zariPair with Pink, gold
ManjariRed striped mul cotton zariPair with Green, gold
SiyaahiMulticolour striped mul cotton zariPair with Black, gold
ElaraOrange floral print pure chiffonPair with Fuchsia, green
RubyRed gold sequin pure chiffonPair with Gold, emerald
You can browse more festival colours in our Teej sarees and hand block print sarees. Delivery is free in India on orders of ₹2,000 and above.
Questions People Ask
Which saree is famous in Rajasthan?
Leheriya and bandhej are the best known, followed by Kota doria, gota patti and the hand block prints of Sanganer and Bagru. Leheriya is most closely linked with Teej and the monsoon.
What are the types of Rajasthani sarees?
By craft: tie-dyed leheriya, mothra and bandhej; woven Kota doria; gota patti ribbon work; and block printed Sanganeri, Bagru and dabu. Each can be made on cotton, silk, georgette or chiffon.
What is the difference between leheriya and bandhej?
Both are tie-dye. Leheriya rolls the whole cloth on the diagonal to make wave stripes, while bandhej ties tiny points one by one to make dots.
What is the difference between Sanganeri and Bagru print?
Sanganeri prints are usually fine florals on a white or off-white ground. Bagru prints are bolder, often in black and red on a cream or yellowish ground, and Bagru also uses dabu mud resist.
What is dabu print?
Dabu is a mud resist block print. A paste of mud or clay, lime and gum is printed on the cloth, which is then dyed, usually in indigo, leaving pale motifs with fine crackle lines.
Which Rajasthani textiles have a GI tag?
On the official register: Kota Doria (2005), Sanganeri Hand Block Printing, Bagru Hand Block Print and Jodhpur Bandhej Craft (2023). We could not find separate GIs for leheriya, gota patti or dabu.
Is Kota doria cotton or silk?
Usually both. The small square khat checks are traditionally woven from a mix of cotton and silk yarn; ask the seller for the blend.
Is gota patti real gold?
Traditional gota used gold or silver wire, but most gota today is lurex, a metallised polyester film. Ask the seller which one it is.
Is the Rajasthani poshak a saree?
No. The poshak is a set of ghaghra, kanchli, kurti and a long veil cloth called the odhna. It shares its crafts and colours with Rajasthani sarees.
Which saree to wear on Teej in Rajasthan?
Green leheriya is the classic choice for Hariyali Teej, often in light cotton or chiffon for the monsoon. Many families also wear red, pink or yellow.
What do women wear for Gangaur?
Bright colours such as red, pink, orange and yellow, often in leheriya or bandhej with gota, or a poshak in Rajput families.
How do I know if a leheriya saree is real?
Look at the back: tie-dye usually shows colour through, and the stripe edges are soft and slightly uneven. A print is paler on the back and repeats exactly.
Share
Keep reading