MAYIN Guides

Pochampally Ikat Saree Guide: How Telangana Ikat Is Made, GI Tag, Price and Care

Six step line drawing of weft ikat: a diamond motif on graph paper, yarn on a frame, rubber ties, red then indigo dyeing, and the woven cloth with feathered diamond edges

A Pochampally saree is a handwoven ikat saree from the Pochampally weaving cluster in Telangana, where the pattern is tied and dyed into the yarn before a single thread goes on the loom. That is what ikat means: the design is in the thread, not printed on the cloth, so the motifs have soft, feathered edges and show almost the same on both sides. This guide explains how the tying and dyeing work with a step by step drawing, then the layout, the motifs, the history, the GI tag, what a Pochampally costs as of 2026 and how to check a real one before you buy.

At a glance
Telanganawoven in Pochampally and nearby villages, Yadadri Bhuvanagiri district
Ikatyarn is resist dyed in the pattern before weaving
GI 2004Pochampally Ikat is a registered Geographical Indication
3 fibrescotton, silk or sico (a silk and cotton mix)

What Is a Pochampally Saree

Bhoodan Pochampally is a small town in Pochampalle mandal of Yadadri Bhuvanagiri district, roughly 40 to 50 km from Hyderabad. It gave its name to the ikat woven there and in the villages around it, such as Koyyalagudem, Siripuram, Puttapaka, Choutuppal, Gattuppal and Vellanki. So a "Pochampally saree" usually means a Telangana ikat saree from this cluster, not only from the one town.

In Telugu the technique has older local names, including paagadu bandhu and chitki. The word ikat itself comes from the Malay and Indonesian mengikat, to bind or tie, which is exactly what the weaver does to the yarn. The look people recognise is geometric: diamonds, squares, chevrons and small stepped flowers repeated across the body, often in strong reds, indigo and black, or in softer greens, blues and pastels for newer designs.

A Pochampally is a handloom saree first, so the basics of warp, weft and handloom cloth apply. If those terms are new, our handloom saree guide explains them, and our guide to saree dyeing techniques shows how ikat sits beside tie and dye, batik and block printing.

Three things that make it a Pochampally
Pattern in the yarnThe warp, the weft or both are tied and dyed in the design before weaving begins.
Feathered edgesMotif edges look slightly blurred and stepped, because each thread lands a little off.
Telangana originWoven in the Pochampally cluster, the area covered by the Pochampally Ikat GI.

How Ikat Works: Single, Double and Combined

Every woven cloth has two sets of threads. The warp runs along the length of the saree and is stretched on the loom first. The weft runs across, carried by the shuttle, one pass at a time. In ikat the weaver decides which of these sets carries the pattern, and ties and dyes only that set, or both.

The three forms of ikat
FormWhat is tied and dyedWhat it means for the saree
Single warp ikatOnly the warpPattern runs along the length; the warp is tied before it goes on the loom.
Single weft ikatOnly the weftHarder to control, since the weaver must line up the pattern on every pass of the shuttle.
Double ikatWarp and weftBoth sets must meet at exact points for the motif to form; the most skilled and slowest work.
Combined ikatWarp and weft, in different areasWarp ikat in one part of the saree and weft ikat in another, with little overlap.

Pochampally weavers work in all of these. Much of what you see in shops is single ikat, which takes less tying than double ikat and so usually costs less. Double ikat silk is the top of the range and is priced to match.

Ikat is also woven in other parts of India, and the regional styles look different. A quick way to tell them apart:

Pochampally and other Indian ikats, in brief
RegionUsual lookWhat to look for
Telangana (Pochampally)Bold geometric grids, diamonds, chevronsRepeating all over motifs across the body; cotton, silk and sico
OdishaCurving motifs such as conch, wheel and fishSofter, more rounded figures; the local name is bandha
Patan, GujaratDense double ikat grids in silkVery fine double ikat; rare and much costlier

How a Pochampally Ikat Is Made, Step by Step

The Ministry of Tourism describes the Pochampally process as about 18 separate steps from raw yarn to finished saree. The heart of it is simple to explain: tie, dye, untie, repeat, then weave. The drawing below shows a weft ikat diamond in red, white and indigo, simplified to a few bundles of yarn.

Six step line drawing of weft ikat: a diamond motif planned on graph paper, yarn bundles wound on a frame, parts tied with dark rubber strips, the yarn dyed red with tied parts left white, the centre opened and dyed indigo, and the woven cloth showing a red, white and indigo diamond with feathered edges
Weft ikat, simplified: the pattern is tied and dyed into the yarn before weaving, one colour at a time, then woven in the same order.
The steps, in order
1
Plan the designThe motif and its colours are worked out first, often on graph paper, so each square stands for a group of threads.
2
Prepare and wind the yarnYarn is washed and wound in bundles on a frame in the exact order it will be woven. For warp ikat this winding is called asu, and it was once slow handwork.
3
Mark and tieThe parts that must keep their current colour are wrapped tightly. Older work used thread; many Pochampally workshops now use strips cut from old cycle tubes, which keep the dye out well.
4
DyeThe bundles go into the dye bath. Dye soaks into the open yarn while the tied parts stay undyed.
5
Untie, re-tie, dye againSome ties are opened and others added, and the yarn is dyed in the next colour. This repeats once for each colour, usually from light to dark.
6
Open all the tiesOnce every colour is in, the ties come off and the yarn shows the full pattern in stretches of colour.
7
Wind bobbins in orderFor weft ikat the dyed yarn is wound onto bobbins in strict sequence, because each pass of the shuttle carries one row of the design.
8
Weave and adjustOn the loom the weaver nudges the weft at every pass so the colours line up. The small shifts that remain are the feathered edges.

In 1999 a local weaver built a machine to do the asu winding, which had taken hours of hand and arm work, and it was recognised by the National Innovation Foundation. Tying, dyeing and weaving are still done by hand.

How long does a saree take? It depends heavily on the design. Weavers interviewed by journalists describe anything from about four days of work for a simpler saree to more than a month for a complex one, and double ikat sits at the slow end.

The Layout: Body, Border and Pallu

Pochampally designs vary a great deal from loom to loom, but many follow one familiar plan. The body carries a repeating grid of small motifs. A border runs along both long edges, often with its own small ikat repeat. The pallu is set apart by stripes and carries larger motifs, sometimes in reversed colours.

Line drawing of a Pochampally ikat saree laid flat: an indigo body with a grid of diamond in square motifs, red borders with small white diamonds on both long edges, and a red pallu with white stripes and large diamonds, with a close up comparing a sharp printed edge and a feathered ikat edge
A common Pochampally layout: geometric ikat body, border on both long edges and a pallu with larger motifs. The close up shows the feathered edge that marks real ikat.
Reading the layout
BodyAll over geometric repeats, or bands of ikat alternating with plain stripes. Some modern sarees keep the body plain and put the ikat only in the border and pallu.
BorderPlain, ikat, or woven with a thin zari line in silk sarees. Narrow borders are common, which suits everyday wear.
PalluLarger diamonds, stripes or a bold grid. The pallu often uses the border colour as its ground.
Blouse pieceMany sarees come with a matching blouse piece woven on at the end, often in the body or border colour. Check the listing, as practice varies.

Motifs and Colours

The signature Pochampally motif is the chowkra, a diamond inside a square, and its many variations. Because ikat is planned on a grid and the threads cannot curve sharply, shapes tend to be built from steps and diagonals. Newer designs add flowers, leaves, birds and even motifs borrowed from patola grids.

Motif names you may hear
Diamond and squarechowkrakaya (diamond)chevronschecks
Stars and flowersnakshatram (star)mallepulu (jasmine)small stepped buttas
Layoutsall over gridikat bands with plain stripesikat border only

Colour follows two broad families. The traditional palette, shared with the old telia rumals, is red, black and white with indigo. Many current sarees use either warm reds and oranges or cooler blues and greens, and there are now plenty of pastels, greys and soft pinks for office wear. Most Pochampally weavers moved to synthetic dyes early, though some workshops now offer natural dyes again.

How to read a motif
A fine Pochampally can look almost printed from a distance. Hold it close: every edge where two colours meet is a little ragged, and the ragged edge looks the same on the reverse. That is the dye in the thread.

Chirala, the Telia Rumal and the Weaving Villages

Ikat in this region is older than the Pochampally name. The main early centre was Chirala, a coastal town in present day Andhra Pradesh, known for the telia rumal: a large square cotton cloth in red, black and white, whose yarn was treated with oil and ash before dyeing. Telia comes from tel, oil. These cloths were used as turbans and wraps, and by the 1930s were exported in large numbers to Burma, the Middle East and East Africa, where they were called Asia rumals.

Ikat is thought to have reached Pochampally from Chirala. Early pieces made here included long saris, dupattas and turbans. In the 1960s weavers in Pochampally were trained in silk weaving, which opened the way for the silk ikat sarees the cluster is known for today. As Chirala's ikat declined, Pochampally became the leading ikat centre, first of Andhra Pradesh and then of Telangana.

Places in the cluster
PochampallyThe best known town, with silk and cotton ikat. The Bhoodan land gift movement began here in April 1951.
KoyyalagudemKnown for cotton ikat, with a weavers' cooperative.
PuttapakaSilk and cotton ikat, and home of the revived telia rumal.
Siripuram and ChoutuppalCotton centres; Choutuppal works mainly in mercerised cotton.
Gattuppal and VellankiSilk and cotton ikat.

The village has been widely recognised. In 2021 the UN World Tourism Organization named Pochampally one of its Best Tourism Villages, and India Post included it in a 2018 stamp series on Indian handlooms. Telangana has other famous weaves too: see our guides to the Gadwal saree and the Narayanpet saree.

The GI Tag and What It Protects

Pochampally Ikat was registered as a Geographical Indication in 2004 (GI application number 4, registered on 31 December 2004), and it is often described as the first handloom product in India to get a GI. A GI registration must be renewed every ten years; it was renewed in December 2023. The GI covers textiles in cotton, silk and sico, in single and double ikat, woven in the defined Telangana area.

A second, separate GI followed in May 2020 for the Puttapaka Telia Rumal, the oil treated red, black and white cloth from Puttapaka village in Narayanpur mandal. You will now see telia rumal sarees, which use that older look in a full length saree.

What the GI does and does not tell you
It doesIt does not
NameProtect the name Pochampally Ikat for ikat from the registered area.Stop shops using "Pochampally" loosely for printed lookalikes.
ProofAllow authorised producers to use the GI logo.Guarantee that every saree sold as Pochampally carries it.
QualityDefine the method and the area.Grade fineness, fibre or price.

For how GI tags differ from the Silk Mark and the Handloom Mark, and what each label proves, see our guide to the Silk Mark, Handloom Mark and GI tags.

Cotton, Silk or Sico, and Price as of 2026

Pochampally sarees come in three main fibres. Cotton is the everyday choice, breathable and a little crisp. Silk has more sheen and colour depth, and is the usual choice for weddings and festivals. Sico, a silk and cotton mix, sits between them: lighter than silk, with a soft lustre. For other regional cotton weaves, see our guide to types of cotton sarees.

Approximate prices, as of 2026
TypeRough priceWhy
Handwoven cotton, single ikatabout ₹2,000 to ₹6,000Cotton yarn and simpler weft patterns
Sico, single ikatabout ₹4,000 to ₹10,000Part silk, often a finer pattern
Silk, single ikatabout ₹10,000 to ₹30,000Silk yarn, more colours, longer tying
Silk, double ikatoften ₹25,000 and well above ₹1,00,000 for the finestBoth sets of threads tied; slow, exact weaving

These are approximate bands from weaver and shop listings in 2026, and prices move with zari, the number of colours and the size of the motif. A smaller motif means more ties and more hours. Our saree price guide compares these bands with other weaves.

How to Spot a Real Pochampally Ikat

Printed "ikat" is common and often sold under the Pochampally name. Printing is not wrong, and a printed ikat style saree can be a good, cheap everyday option, but it should be priced and described as a print. These checks help in the shop or when a parcel arrives.

Before you buy
Turn it over. In real ikat the colour is in the yarn, so the pattern is almost as strong on the back. A print is usually paler or blank on the reverse.
Look at the edges of a motif. Ikat edges are slightly blurred and stepped. Perfectly sharp, identical outlines suggest a print or screen.
Check the repeat. Hand tied motifs vary a little from one to the next. Machine perfect repeats over the whole saree are a warning sign.
Check the selvedge. Handloom edges are firm but slightly uneven; the weft may show small loops at the sides.
Ask for the fibre in writing: cotton, silk or sico. For silk, ask whether it carries the Silk Mark.
Look for the GI logo or a Handloom Mark on the tag, and ask whether the saree is single or double ikat.
Weigh the price. A silk double ikat at a cotton print price is not what it claims to be.
Good to know
Double ikat check: in a double ikat both the lengthwise and crosswise threads carry colour, so a single motif shows feathering on all four sides, and the threads at a colour change are coloured in both directions. In single weft ikat the warp carries no tied pattern; it is usually one plain colour, sometimes with simple stripes.

Blouse, Styling and Care

Pochampally patterns are busy, so the blouse usually does better plain. Pick the strongest colour in the motif, or the border colour, in cotton for a cotton saree and raw silk or a matching silk for a silk one. A plain round or boat neck with elbow sleeves suits the weave for work and day events. For a festive look, a contrast blouse with a narrow zari edge works well against a silk Pochampally.

Easy pairings
Red and white ikatindigo blouseblack blouseoxidised silver jewellery
Indigo or black ikatred blousemustard blousesilver or kundan
Pastel ikativory blousematching pastelpearls or small studs

Cotton ikat is a firm, slightly stiff weave, so pleats hold well; give it a good press before draping. For blouse colour ideas that work with patterned sarees, see our blouse ideas by colour.

Care, by fibre
CottonWash separately in cold water with a mild liquid detergent for the first few washes, as deep reds and indigo can bleed. Do not soak or wring. Dry in shade.
Silk and sicoDry clean is the safest choice. Air it after wearing and store folded in a cotton cloth, refolding every few months.
IroningIron cotton on the reverse while slightly damp. Use a low setting and a pressing cloth for silk.

Our guide on how to wash cotton, chiffon and linen sarees covers the first wash and colour testing in more detail.

Lighter MAYIN Sarees With a Similar Feel

None of the sarees below is an ikat. They are lighter MAYIN sarees that share something with a Pochampally: geometric checks and stripes, or a handwoven body. Corner Office (checked) and Crosswalk (striped) are pure handloom linens whose bold lines sit close to the Pochampally grid, and On Repeat is a yellow handloom linen with a zari border. All three come with a 1 m blouse piece, are dry clean only and cost ₹4,499. Browse more in handloom sarees, linen sarees and checked sarees.

Lilac Bloom is an Original Dhakai Jamdani, a handwoven saree priced at ₹4,999, with no blouse piece; it is dry clean only. Saturday (₹1,899) and Cloudless Sky (₹2,199) are light mul cotton sarees without a blouse piece, and both take a gentle cold hand wash. Every MAYIN saree is 5.5 m long and 45 inches wide, and delivery in India is free on orders of ₹2,000 and above.

Questions People Ask

What is a Pochampally saree?

It is a handwoven ikat saree from the Pochampally cluster in Yadadri Bhuvanagiri district, Telangana. The pattern is tied and dyed into the yarn before weaving, which gives it soft, feathered edges.

Is Pochampally and ikat the same?

Not quite. Ikat is the technique of resist dyeing yarn before weaving, and it is done in several regions. Pochampally is ikat from one place, Telangana, with its own geometric style and its own GI.

Is Pochampally saree silk or cotton?

Both. Pochampally sarees are woven in cotton, silk and sico, a silk and cotton mix. Cotton is the everyday choice and silk is usually worn for weddings and festivals.

How can I identify an original Pochampally saree?

Turn it over: the pattern should be almost as strong on the back. Look for slightly blurred, stepped motif edges, small differences between repeats, a handloom selvedge and a GI or Handloom Mark tag.

What is the price of a Pochampally saree?

As of 2026, roughly ₹2,000 to ₹6,000 for handwoven cotton, about ₹10,000 to ₹30,000 for silk single ikat, and more for silk double ikat. Zari, colours and motif size change the price.

Why are ikat sarees expensive?

Every colour needs its own round of tying, dyeing and untying before weaving even starts, and the weaver must line up the pattern on the loom by hand. Double ikat doubles that work.

Does Pochampally ikat have a GI tag?

Yes. Pochampally Ikat was registered as a Geographical Indication in 2004 and the registration was renewed in December 2023. Puttapaka Telia Rumal received a separate GI in 2020.

What is double ikat?

Double ikat is when both the warp and the weft are tied and dyed before weaving, and they must meet at exact points to form the motif. It is the slowest and costliest kind of ikat.

What is a telia rumal?

A telia rumal is an oil treated ikat cloth in red, black and white, first made in Chirala and now revived in Puttapaka, Telangana. Telia comes from tel, oil.

Does Pochampally cotton saree colour bleed?

Deep reds and indigo can bleed in the first few washes. Wash it alone in cold water with a mild detergent, do not soak it, and dry it in shade.

Why is Pochampally famous?

For its geometric ikat sarees, for the GI tag, and as the village where the Bhoodan land gift movement began in 1951. In 2021 it was also named one of the UN World Tourism Organization's Best Tourism Villages.

Can I wear a Pochampally saree to the office?

Yes. A cotton or sico Pochampally in a muted colour with a plain blouse is a common office choice, as the firm weave holds pleats well through the day.

All guides