Marathi Bridal Look: Nauvari, Paithani, Nath and Mundavalya Explained
By Nishita Nathani18 min read
A Marathi bridal look is built on a silk saree, usually a nine-yard nauvari or a six-yard Paithani with peacocks on the pallu, worn with a pearl nath in the nose, a red crescent chandrakor on the forehead, a mundavalya tied across the brow and green glass bangles stacked with gold. Around that core sit a few more pieces: the thushi and kolhapuri saaj at the neck, the vaaki on the upper arm, a bun with gajra and silver toe rings. This guide explains each piece, where it comes from, what it means, and how to put the whole look together, whether it is for your own wedding, a sister's, or a Gudi Padwa photo.
The Pieces of a Marathi Bridal Look
Most Maharashtrian brides wear the same family of pieces, though the exact set changes by community, region and family. Think of the look in four zones: the saree, the face, the head and the hands. Get those right and the rest is personal choice.
If you are new to Indian bridal dressing in general, our bridal saree guide covers fabric weight, budgets and blouse timelines across regions. This page stays with Maharashtra.
The Nauvari: Nine Yards and the Kashta
Nauvari means nine yards in Marathi. The saree is also called kashta or kaashta, after the way one end passes between the legs and is tucked at the back. The result looks like a dhoti or trousers from the side and lets the wearer sit on the floor, climb steps and walk briskly without anything slipping. It is sometimes described as an akhanda vastra, a garment that needs nothing else to hold it up, and it was traditionally worn without a petticoat.
The usual story is that the drape grew up in the Maratha period, when women who supported warriors needed clothing that let them move freely. It became the everyday dress of many Maharashtrian women and later the ceremonial one. The nauvari was first woven in plain cotton. Silk nauvaris, with zari borders and Paithani pallus, are what most brides wear now.

A standard 5.5 m saree is usually too short for a full kashta drape. If you love the look but own only six-yard sarees, the practical options are a pre-stitched nauvari, which is sewn to your waist size and closes with hooks or ties, or renting a nine-yard silk. The six-yard Paithani worn in the regular nivi drape is just as traditional for many families. Our saree draping styles guide and saree length guide explain what each drape needs.
The Paithani: Peacocks, Lotus and Gold
Paithani is a handwoven silk saree named after Paithan, an old town on the Godavari in Chhatrapati Sambhajinagar district. Paithan was the ancient city of Pratishthan, and the weave is usually traced to the Satavahana period, roughly the 2nd century BCE to the 2nd century CE, when Paithan was a trading centre with links as far as the Roman world. Weaving later spread to Yeola in Nashik district, a move often credited to the Peshwas, and Yeola is now the largest centre. Paithani sarees and fabrics received a Geographical Indication tag in 2010.

What makes a Paithani different is how the pattern is made. The pallu and border are woven in a tapestry method: the weaver passes each coloured weft only across its own motif and interlocks it with the next colour by hand. That is slow work, and a complex Paithani can take many months on the loom. It also means a handwoven Paithani has very few loose threads floating on the back of the pallu.
Old Paithani colours have their own names too, such as kalichandrakala for black, morpankhi for peacock green and pophali for chrome yellow. For how to check a Paithani before you buy, how the weave is priced and how to store it, see our full Paithani saree guide. GI tags and handloom labels are explained in Silk Mark and Handloom Mark.
Nauvari or Paithani, or Both
These are not rival choices. Nauvari is a drape and a length. Paithani is a weave. A bride can wear a Paithani woven in nine yards and draped as a nauvari, which is the most traditional combination, or a six-yard Paithani in the nivi drape, or a nine-yard silk nauvari that is not a Paithani at all. Many brides wear one for the main ceremony and the other for a later ritual or the reception.
The Nath and the Face Jewellery
The Maharashtrian nath is not a ring. It is a crescent-shaped piece, usually set with small pearls around a central stone, that curves from the nostril across the side of the nose. The style many brides choose is often called the brahmani nath, made of gold, pearls and beads. It sits close to the face rather than hanging, which is why it stays in place through rituals and photos.
For how earrings balance a nath and a heavy neckline, see our earrings for saree guide.
The Chandrakor and Bridal Makeup
The chandrakor is a red, crescent-shaped mark between the eyebrows. It was traditionally drawn with kumkum using a small copper tool, and it is widely linked with the reign of Chhatrapati Shivaji Maharaj as a sign of Maratha identity and pride. Married women traditionally wore it as a sign of their status, and today women of every age wear it with Paithani or lugade at festivals such as Gudi Padwa and Ganesh Chaturthi.
Ready-made crescent stick-on bindis exist and are easier on a busy day. Bridal makeup for the Marathi look is usually warm and defined: kohl-lined eyes, a red or deep rose lip and a natural base. More on shapes and meanings in our bindi styles guide.
The Mundavalya and Hair
The mundavalya is the one piece both the bride and groom wear. It is a set of strings of pearls, beads, gold beads or flowers tied across the forehead and knotted behind the ears. The two strands are said to stand for the togetherness of the couple. It is tied for the main wedding ceremony and kept on through the rituals.
The hair under it is usually a low or mid bun, the ambada, wrapped in gajra and fixed with a crescent-shaped gold bun pin. A tight, smooth bun gives the mundavalya a firm line to sit on. Open hair is rare with a mundavalya because the strands catch. For step-by-step buns, see our bun hairstyles guide.
Green Bangles and the Wrist Stack
Green glass bangles are the signature of a married Maharashtrian woman. In the chura ritual before the wedding the bride receives green glass bangles together with gold or pearl bangles, and in many families she keeps them on for a month or more afterwards. Green is said to stand for life, creation and fertility.
Glass bangles break, so buy a few more than you need and keep spares in your bag. Have them put on the day before if your family follows the chura ritual, then wear them in for comfort. Our bangles with saree guide covers sizing and how many to wear with each kind of sleeve.
For how to layer a choker and a long necklace over a blouse neckline, see our jewellery for saree guide.
What the Bride Wears at Each Ritual
A Marathi wedding has several rituals over a day or two, and the bride does not wear the same saree throughout. The order below is common, but families differ.
For the halad, a light saree you will not mind staining is sensible; our haldi saree guide has ideas. For the reception, see sarees for a wedding reception.
How to Recreate the Look
This is a common modern method; experienced drapers vary the order, and older drapes centre the saree at the back. It works for a bride, a bridesmaid in a nauvari, or a Gudi Padwa or photo-shoot look. Allow about two hours for hair, makeup and a nine-yard drape with help.
For a six-yard Paithani, drape the standard nivi with the pallu over the left shoulder and let the padar fall wide at the back so the peacocks show. Our saree pleats guide and pinning guide help keep a heavy silk in place.
Sarees for the Other Functions
The sarees below are lighter choices for the functions around a Marathi wedding: the halad, the sakhar puda, the reception, a sister or mother of the bride, or a Gudi Padwa look with a chandrakor and green bangles. Every MAYIN saree is 5.5 m long and 45 inches wide, so they are draped in the six-yard style, not as a nauvari.
EmeraldGreen striped mul cotton zariPair with Gold, maroon
ManjariRed striped mul cotton zariPair with Green, gold
On RepeatYellow handloom linen with zari borderPair with Green, maroon
ComposurePink pure handloom linen with zari borderPair with Bottle green, gold
EmeraldGreen gold sequin pure chiffonPair with Gold, maroon
RubyRed gold sequin pure chiffonPair with Gold, bottle green
Emerald and Manjari are mul cotton with zari stripes, light enough for a long chura or sakhar puda morning; they come without a blouse piece and are dry clean, so keep them away from the halad paste. On Repeat and Composure are pure handloom linen with zari borders and a 1 m blouse piece, at ₹4,499; the yellow suits the colour of a halad day for the mother or sisters of the bride, kept clear of the turmeric, and the pink sits well beside green bangles. For a reception, the green and red gold sequin pure chiffons, Emerald and Ruby, come with a 1 m crepe blouse piece and are dry clean. Browse more in wedding sarees, green sarees and zari sarees. Delivery is free in India on orders of ₹2,000 and above.
If you are dressing for a sibling's wedding, our saree for sister and brother wedding guide helps you plan by function, and styling a green saree pairs naturally with green bangles. For the wider family of regional bridal looks, see South Indian bridal sarees and the traditional saree look.
Questions People Ask
What does a Marathi bride wear?
Usually a silk saree, either a nine-yard nauvari or a six-yard Paithani, with a pearl nath, a red chandrakor bindi, a mundavalya across the forehead and green glass bangles with gold. The thushi, kolhapuri saaj, mangalsutra, vaaki and silver toe rings complete the look.
What is the difference between nauvari and Paithani?
Nauvari is a nine-yard drape with one end tucked between the legs at the back. Paithani is a handwoven silk from Paithan and Yeola with tapestry-woven peacock pallus. A Paithani can be woven in nine yards and draped as a nauvari.
What colour saree does a Marathi bride wear?
There is no single rule. Yellow, green, orange, purple, pink and red silks with gold borders are all common, and many families follow their own custom for the main ceremony.
What is a mundavalya?
A forehead ornament of pearl, bead or flower strings tied behind the ears, worn by both the bride and groom at the wedding. Its two strands are said to stand for the togetherness of the couple.
Why do Maharashtrian brides wear green bangles?
Green glass bangles mark a married Maharashtrian woman, and green is said to stand for life, creation and fertility. They are given in the chura ritual and in many families kept on for a month or more.
What is a chandrakor bindi?
A red crescent-moon mark between the eyebrows, traditionally drawn with kumkum. It is linked to Maratha identity and is worn by brides and by women at festivals such as Gudi Padwa.
What is the Marathi nose ring called?
It is called a nath. The Maharashtrian nath is crescent shaped, set with pearls around a central stone, and sits along the side of the nose rather than hanging as a ring.
How many metres is a nauvari saree?
Nine yards is about 8.2 m, and most nauvaris are roughly 8 to 9 m long. A standard saree is about 5.5 m, which is usually too short for a full kashta drape.
Can I wear a nauvari without a petticoat?
Yes, the traditional nauvari is worn without one because the back tuck holds it. Many women now wear a fitted ankle-length petticoat for comfort.
Can I drape a six-yard saree in Marathi style?
A six-yard saree is usually too short for the full nine-yard drape. A pre-stitched nauvari or a six-yard Paithani in the nivi drape are the practical choices.
What is a shalu in a Marathi wedding?
A shalu is a rich silk wedding saree. The bride often wears a Paithani or a shalu for the Gauri Har ritual, usually a gift from her maternal uncle.
What jewellery is gifted to a Marathi bride by the groom's family?
The kolhapuri saaj is often gifted by the groom's family, and the groom's mother traditionally gifts the silver toe rings called jodvi.
Share
Keep reading