MAYIN Guides

Katan Silk Saree and the Other Banarasi Fabrics and Weaves, Explained

Line drawing of two Banarasi saree layouts showing jaal, buttas, zari border and brocade pallu

A katan silk saree is a Banarasi saree woven from katan, a pure mulberry silk yarn made by twisting fine filaments together and then removing the natural gum, so the cloth feels soft, smooth and gently lustrous. Katan is one of four base fabrics used in Banaras, beside kora (organza), georgette and shattir, and on top of any of them the weaver can add a design technique such as tanchoi, jangla, cutwork or kadhua. This guide explains each fabric and each weave, how to tell them apart by touch and by looking at the back of the cloth, what they usually cost as of 2026, and how to care for them. For the history of Banaras weaving, the classic motifs and how to style a Banarasi, read our Banarasi saree guide first. This one goes a layer deeper, into the cloth itself.

At a glance
4base fabrics: katan, kora, georgette and shattir
2009year Banaras Brocades and Sarees received a GI tag
6districts in the GI area, led by Varanasi
15 days to 6 monthsusual weaving time on a handloom, by design

What Katan Silk Is

Katan is a yarn first and a fabric second. Weavers take mulberry silk filaments, twist two of them together into a two-ply thread, and degum it, which means washing out sericin, the gum the silkworm uses to hold its cocoon together. Degumming is what turns a stiff, dull thread into a soft one with a quiet shine. When that twisted, degummed yarn is used in both the warp (the lengthwise threads) and the weft (the crosswise threads), the cloth is called katan.

Textile references describe katan as a plain-woven fabric of pure silk threads. In a shop, "katan silk saree" usually means a Banarasi with a katan ground, which may be plain, may carry small woven motifs, or may be covered in brocade. Older katan sarees were all handwoven. Today katan is woven on handlooms, power looms and rapier looms, so the word tells you about the yarn, not about the loom.

What katan feels like
Soft handSmooth and supple, not crisp. It falls in rounded folds rather than sharp ones.
Satin-like sheenA gentle, even lustre from the degummed silk, deeper than the glassy shine of polyester.
Medium weightPlain katan is light to medium. Heavy brocade and real zari make it much heavier.
OpaqueUnlike kora, a katan ground does not let light through, so it needs no lining.

If you are new to silk as a fibre, our guide to types of silk sarees explains mulberry, tussar, eri and muga, and why reeled silk feels smoother than spun silk.

The Four Base Fabrics of a Banarasi

Most Banarasi sarees are described by two words: a base fabric and a design. The base fabric is what you feel against your skin. Textile references list four main ones for Banaras.

Banarasi base fabrics side by side
FabricYarnFeel and fallUsually chosen for
KatanTwisted, degummed pure mulberry silk in warp and weftSoft, smooth, opaque, soft sheenWeddings, family functions, heirloom pieces
Kora (organza)The same kind of silk yarn left with its gumCrisp, sheer, light, holds its shapeSummer weddings, day functions, a lighter festive look
GeorgetteHighly twisted crepe yarns, often blendedMatte, grainy, fluid, clings and drapesReceptions, parties, easier all-day wear
ShattirVaries by maker; ask the sellerUsually lighter than katanContemporary designs

Georgette. Banarasi georgette is woven from crepe yarns twisted very hard, some in one direction and some in the other. That opposite twist is what gives the slightly pebbly surface and the liquid drape. Many Banarasi georgettes today are blends rather than pure silk, so read the label or ask. For georgette as a fabric in its own right, see our georgette saree guide.

Shattir. Sources on Banaras weaving describe shattir only as a fabric used for exclusive and contemporary Banarasi designs. The word is used loosely in the market, so if a saree is sold as shattir, ask what the warp and weft are made of before you pay a silk price.

Katan vs Kora: How to Tell Them Apart

Katan and kora start from the same silk. The difference is one step. Kora silk is not degummed, or only partly, so it keeps most of its sericin, which makes the yarn stiffer and the cloth sheer and crisp. In Banaras shops, kora and organza are used for this same sheer, stiff silk, and a kora saree is often called a kora organza Banarasi.

Katan or kora in your hand
KatanKora (organza)
Hold it to lightLight does not pass through; the ground looks solidYou can see your fingers through the ground
Crush a cornerSoft folds that relax quicklySharp creases and a slight crackle
DrapeFalls close to the body in soft pleatsStands away from the body, pleats hold a crisp edge
SheenEven, satin-like lustreA dry, glassy shimmer
PetticoatAny matching petticoat worksNeeds a matched, opaque petticoat because the ground is sheer
Best seasonCooler months and evening eventsWarm days and outdoor day functions
Good to know
A kora Banarasi often has a katan border or katan motifs woven in. The sheer ground and the softer, solid motifs side by side are a sign of good weaving, not a fault.

Organza as a broader category also includes synthetic versions from many places. Our organza saree guide covers how to tell silk organza from synthetic and how to drape a crisp fabric.

Fabric and Weave Are Two Different Things

This is where most confusion comes from. "Katan" and "kora" describe the cloth. "Tanchoi", "jangla", "cutwork" and "kadhua" describe how the pattern is woven into that cloth. So one saree can be a katan tanchoi, a kora cutwork or a georgette jangla.

Reading a label
Katan TanchoiKatan groundTanchoi weave
Kora KadhuaKora groundHand-woven motifs, no floats
Katan CutworkKatan groundFloats cut away after weaving
Georgette JanglaGeorgette groundAll-over creeper pattern

Almost every Banarasi design is made with an extra weft, also called a supplementary weft. Besides the main weft that builds the cloth, the weaver passes additional threads of silk or zari only where the pattern needs them. What separates the weaves is how those extra threads are handled: carried across the whole width, woven motif by motif, or worked into a satin ground.

Tanchoi: The Satin Weave with a Surat Story

A tanchoi saree has a smooth satin ground with a dense, all-over pattern woven in several coloured silk wefts, often small paisleys, florals or birds. It feels flat and fluid rather than raised. Textile references describe the structure as a mix of twill and sateen weaves. A defining quality is that even intricate designs leave no long, loose weft floats on the back.

Where the Name Comes From

The story usually told begins with Parsi trade with China in the nineteenth century. Chinese brocaded silks were prized in Parsi homes, and around 1856 a Parsi merchant is said to have sent three weavers of the Joshi family of Surat to China to learn the technique. When they returned, the cloth they wove took their teacher's name, Chhoi, with "tan", close to the Gujarati word for three, for the three brothers. Tanchoi became part of many Parsi bridal trousseaus. Demand in Bombay faded as tastes changed in the early twentieth century, and by around the middle of the century Banaras weavers had taken up the technique. Most tanchoi today is woven in Banaras.

How to spot a tanchoi
Satin groundA smooth, slippery surface with a soft shine, smoother than plain katan.
Many colours, small scaleFine all-over motifs in several silk colours, often with little or no zari.
Flat, not raisedRun your palm over it. A tanchoi feels almost flat; a brocade feels raised.
A clean backThe reverse shows the pattern in reverse colours, without long loose threads.

Shops also sell a finer tanchoi variety called vaskat (sometimes spelt vascot), woven so finely that the floats on the back are very short and the cloth can almost be worn from either side.

Jangla, Butidar and Tissue

Jangla takes its name from the jungle. It is an all-over pattern of scrolling creepers, leaves and flowers that spreads across the body of the saree, woven in extra weft of silk or zari, often with coloured meena work picked out within the gold. It is counted among the oldest Banaras designs. A jangla reads as busy and festive from across a room.

Butidar is the opposite idea: a ground scattered with separate small motifs, called buti or butta, in gold, silver or silk. Where gold and silver zari are used together, the silver often lightens part of each motif. A katan butidar with coloured meena inside the buti is a classic wedding choice.

Tissue puts zari into the weft itself, against a silk warp, so the whole ground glints. A Banaras tissue often carries golden lotus motifs on a shimmering field. It is the lightest way to get an all-gold look. Our guide to tissue sarees explains the weave in more detail.

Which design to choose
DesignWhat you seeReads as
JanglaContinuous creepers over the whole bodyRich, traditional, bridal or near-bridal
ButidarSmall separate motifs on a plain groundClassic, easy to wear again and again
TissueZari shine across the whole groundFestive and light, good for evening
TanchoiFine multicoloured pattern on satinRefined, less gold, good for older and younger wearers

Cutwork vs Kadhua: Turn the Saree Over

These two techniques can make motifs that look almost the same from the front. The back tells you which one you have, and it matters, because one takes much longer to weave and usually costs more.

Kadhua (also spelt kadwa or kadhuan) is the Banaras name for the technique other clusters call jamdani. The weaver builds each motif separately with small shuttles or bobbins of extra weft, working only inside the motif. Nothing floats between motifs, so the back is tidy and the motifs look nearly as finished as the front. It is slow work and adds strength to the cloth.

Cutwork (called phekwa or fekwa by weavers) runs the extra weft right across the width, selvedge to selvedge, on every pass that carries pattern. After weaving, the loose threads hanging between motifs are cut away by hand. Weaving is quicker, the ground is lighter and often slightly see-through, and the back shows short clipped thread-ends around each motif. Textile writers call it the more affordable adaptation of jamdani.

Back of the cloth
Kadhua (jamdani)Cutwork (phekwa)
Between motifsClean ground, no loose threadsShort clipped thread-ends around each motif
Motif outlineEach motif sealed in on all sidesEdges can look slightly fringed
WeightSturdier, slightly heavierLighter, softer, more sheer
Time and costSlower; usually costs more for the same designFaster; usually costs less
Long-term wearMotifs hold wellClipped ends can loosen if snagged or scrubbed
Two kinds of jamdani
A Banarasi jamdani is a silk saree with motifs woven in silk, cotton or zari. It is not the same as a Dhakai jamdani, which is a fine cotton muslin from Bengal and Bangladesh woven with a similar floatless technique. Our guide to Dhakai jamdani explains the cotton tradition.

How to Read a Banarasi in the Shop

You do not need special tools. Ask to unfold the saree fully, take it near a window, and work through these checks in order.

Five checks before you buy
1
Name the base fabricHold it to the light and crush a corner. Solid and soft means katan; sheer and crisp means kora; matte and grainy means georgette.
2
Turn it overLook between motifs on the back. A clean back suggests kadhua or tanchoi; clipped thread-ends mean cutwork; long loose floats across the width usually mean a power loom brocade.
3
Look at the edgesA handloom selvedge is usually firm but slightly uneven. Perfectly even edges, or the same small flaw repeated at exactly the same interval, often point to a machine.
4
Ask about the zariReal zari is silver wound on silk and gold-plated. Tested zari is silver-plated copper. Metallic zari is made from metallised polyester film. Each is fine at its price, but they should not cost the same.
5
Ask for the labelsSilk Mark confirms the fibre is natural silk. The Handloom Mark speaks to how it was woven. A seller of genuine Banaras handloom should be able to tell you about both.

Our guide to Silk Mark and the Handloom Mark explains what each label covers, and our zari saree guide goes deeper into real, tested and metallic zari. For the GI tag itself, see GI tag sarees.

Questions to ask the seller
Is the warp and weft pure katan silk, or a blend?
Is this handloom, power loom or rapier loom?
Are the motifs kadhua or cutwork?
Is the zari real, tested or metallic?
Does it carry a Silk Mark tag, and can I see it?
Is a blouse piece included, and is it woven with the border?

Price Bands as of 2026

Prices for Banarasi sarees vary more than almost any other weave, because the same design can be made in synthetic on a power loom or in pure katan with real zari on a handloom. As of 2026, roughly, sellers' listings sit in these bands. Treat them as a guide, not a rule.

Approximate Banarasi price bands, 2026
TypeApproximate priceWhat you are usually paying for
Power loom or synthetic Banarasi-styleUnder about ₹3,000The look, in polyester or blends, with metallic zari
Georgette BanarasiAbout ₹3,000 to ₹8,000Fluid drape, lighter work, often blended yarn
Handloom katan or koraAbout ₹8,000 to ₹25,000Pure silk, hand weaving, usually tested zari
Bridal katan, dense kadhua, real zariAbout ₹25,000 to ₹1,50,000 and aboveWeeks or months of weaving, heavy work, precious metal

Within the same band, two things usually move the price. Kadhua costs more than cutwork for the same design, because it takes longer. Real zari costs many times more than tested or metallic zari. Tanchoi, jangla and butidar can sit anywhere from the handloom band upwards, depending on density and zari. If a "pure katan handloom kadhua with real zari" is priced like a power loom saree, something in that description is not true. For how saree prices work across weaves, see our saree price guide.

Caring for Katan, Kora and Georgette

All three are silk or silk-based and almost always carry zari, so the safe default is dry cleaning. Most damage to a Banarasi happens in storage, not while wearing it.

Care that keeps a Banarasi for years
1
Air it after wearingHang it in shade for a few hours to let out body heat and moisture before you fold it.
2
Spot, do not scrubBlot a fresh stain gently with a clean cloth and take it to a dry cleaner who handles silk. Scrubbing pulls zari and cutwork threads.
3
Iron on the reverseUse a low silk setting with a thin cotton cloth between the iron and the saree, and never press directly on zari.
4
Wrap in cottonStore it folded in a soft cotton or muslin cloth, not in plastic, which traps moisture.
5
Refold every few monthsOpen it and fold along new lines so the zari does not crack at the same creases.
6
Keep it away from perfume and sunSpray perfume before you drape, and keep the saree out of direct sunlight, which fades silk.
Fabric by fabric
KatanFold softly. It forgives handling well but zari areas need padding with tissue or cotton in the folds.
KoraCreases sharply. Roll it, or fold loosely with as few folds as possible, and steam lightly to refresh.
GeorgetteStretches if hung for long. Fold it, and avoid hanging a heavy georgette Banarasi on a thin hanger.

For full step-by-step storage, read how to store silk sarees, and for what you can and cannot wash at home, how to wash a silk saree.

Lighter Sarees with Zari and Woven Texture

A katan Banarasi is a saree for big days. For the many days in between, when you want a woven border or a touch of zari without the weight or the price of silk, these MAYIN sarees are a sensible lighter alternative. They are cotton, linen, jamdani and tissue sarees, and each is 5.5 m long and 45 inches wide.

Lilac Bloom is an Original Dhakai Jamdani, woven with the same floatless motif technique as a Banarasi kadhua, in cotton. It comes without a blouse piece, needs dry cleaning and is ₹4,999. Miss Earth Tissue Saree is a handloom tissue with an all-over glint, ₹3,499, without a blouse piece, dry clean only.

On Repeat and Composure are pure handloom linen with zari borders, ₹4,499 each, with a 1 m blouse piece, dry clean. Emerald (₹2,099) and Manjari (₹2,299) are mul cotton with zari stripes, without a blouse piece, dry clean. Browse more in our zari sarees, jamdani sarees and tissue sarees. Delivery is free in India on orders of ₹2,000 and above.

Questions People Ask

What is a katan silk saree?

It is a Banarasi saree woven from katan, a pure mulberry silk yarn that is twisted and degummed. The result is soft, smooth and opaque with a gentle sheen, and it can be plain, butidar, jangla or brocaded.

Is katan silk pure silk?

Katan by definition is pure silk in both warp and weft. In practice some sarees sold as katan are blends, so check for a Silk Mark tag and ask the seller what the yarn is.

What is the difference between katan silk and Banarasi silk?

Banarasi tells you where and in what tradition the saree was woven. Katan tells you the yarn. A katan silk saree is one kind of Banarasi; others are kora, georgette and shattir.

Katan or organza, which is better?

Neither is better, they suit different days. Katan is soft and opaque for cooler months and evenings; kora organza is sheer, crisp and lighter, good for warm day functions.

What is kora silk?

Kora is silk yarn left with its natural gum, so it is stiff and sheer. In Banaras it is the base of the kora organza Banarasi, often with katan motifs woven in.

What is a tanchoi saree?

A tanchoi has a smooth satin ground with a fine, all-over pattern in several coloured silk wefts and few or no long floats on the back. The technique came to Surat from China in the nineteenth century and is now woven in Banaras.

What is the difference between cutwork and kadhua?

In kadhua each motif is woven separately, so the back is clean. In cutwork the extra weft runs across the width and is cut away after weaving, so the back shows clipped ends. Kadhua usually costs more.

What is jangla Banarasi?

Jangla is an all-over pattern of scrolling creepers and flowers that covers the body of the saree, in silk or zari extra weft. It is one of the oldest Banaras designs.

What is the price of a katan silk saree?

As of 2026, roughly, a handloom katan sits around ₹8,000 to ₹25,000, and bridal pieces with dense kadhua and real zari go from about ₹25,000 to ₹1,50,000 and above. Power loom versions cost far less.

Is katan silk heavy?

Plain katan is light to medium. The weight comes from brocade and zari, so a heavily brocaded katan with real zari can feel heavy, while a butidar katan is easy to wear for a whole day.

Can I wash a katan silk saree at home?

It is safest to dry clean, because silk can lose its sheen and zari can tarnish or pull with home washing. Air it after wear and store it in cotton.

How do I know if a Banarasi is handloom?

Look for a slightly uneven but firm selvedge, check the back for how motifs are woven, ask about the Handloom Mark and GI, and be wary of handloom claims at power loom prices.

All guides