MAYIN Guides

Kalamkari Blouse Designs: Six Cuts, Motif Placement and Sarees to Pair

Six kalamkari blouse designs as line drawings: an all over block print boat neck, a plain black blouse with printed borders, a printed collar blouse with buttons, a maroon back with a tree of life panel, a patchwork V neck and printed puff sleeves

The best kalamkari blouse designs are simple cuts that let the print do the work: a boat neck or round neck, elbow or three quarter sleeves, and a large motif placed squarely on the back. Worn with a plain cotton, linen or silk saree, a kalamkari blouse turns a quiet drape into an outfit with very little effort from the rest of your look. This guide shows six designs in drawings, the necklines and sleeves that suit pen and block prints, how to place a motif before the fabric is cut, which sarees to pair, what to tell your tailor and how to wash the blouse so the natural colours last. For the craft itself, from Srikalahasti pen work to Pedana block printing, read our kalamkari saree guide.

Kalamkari blouses at a glance
6 designsall over print, print borders, collar, back panel, patchwork, printed sleeves
About 1 mthe usual blouse piece; full sleeves may need a little more
Plain sareethe most common pairing, in a colour taken from the print
Cold washseparately at first, as natural dyes can bleed a little

What Makes a Blouse Kalamkari

A kalamkari blouse is stitched from cotton or silk that has been pen painted or hand block printed in the kalamkari way, with an earthy palette of red, indigo, mustard, olive and a soft brown black on an ecru or coloured ground. You will find three kinds of fabric sold under the name, and the kind you buy changes which design works best.

Three kinds of kalamkari blouse fabric
FabricHow it looksBest used for
Pen kalamkariFreehand outlines and fills; often a single large scene, tree of life or panel per pieceSimple cuts that keep the panel whole, usually on the back
Hand block printedSmall blocks repeated in rows, with slight shifts where impressions meetAll over print blouses, borders, piping and patchwork
Screen printed "kalamkari print"Even, perfectly repeated lines; often brighter coloursEveryday blouses; cheaper, so good for trying a bold cut

Pen work is drawn on one piece at a time, so the layout of the motifs on your fabric is fixed and the tailor has to work around it. Block and screen prints repeat, which gives far more freedom in cutting. How to tell them apart, and what each costs as a saree, is covered in the kalamkari saree guide.

Six Kalamkari Blouse Designs

These six designs cover most of what you see on kalamkari blouses, from office cottons to festive silks. Each one uses the print differently, so start by deciding how much kalamkari you want on your body.

Six kalamkari blouse designs as line drawings: an all over block print boat neck with elbow sleeves, a plain black round neck with printed borders on the neck and sleeve hems, an all over print collar blouse with front buttons and three quarter sleeves, a maroon deep U back with a tree of life panel below the opening, a V neck made of patchwork print panels, and a plain black square neck with printed puff sleeves
Six ways to use kalamkari on a blouse, from an all over print to a single panel or just the sleeves.
The six designs and when to choose them
1. All over block printBoat neck with elbow sleeves, cut entirely from a small repeat. The most wearable choice with a plain saree, and easy to cut because the repeat hides seams.
2. Plain with print bordersA solid black, maroon or indigo blouse with kalamkari strips on the neckline and sleeve hems. Good when you have only a small piece or offcuts left from a saree.
3. Collar with front buttonsA band collar, front opening with buttons and three quarter sleeves. Reads like a shirt, so it suits the office, college and day events.
4. Pen kalamkari back panelA solid blouse with one pen painted panel, such as a tree of life, set below a deep U back. The panel is the point, so keep the front plain.
5. Patchwork panelsPrint pieces and solid pieces joined in blocks, often in indigo, red and mustard. Uses up small pieces and looks best with a very plain saree.
6. Printed puff sleevesA plain square neck body with puff sleeves cut from the print and a thin print edge on the neck. A light touch of kalamkari for a dressier look.

Designs 1 and 3 need the most fabric, since every piece is printed. Designs 2, 5 and 6 need only part of a piece, so they are a good way to use what is left after cutting a blouse from a kalamkari saree, or an old piece you love. If you are short of fabric, these three are also the easiest to combine with a solid blouse fabric in a colour from the print.

Necklines and Sleeves That Suit the Print

Kalamkari is busy and the lines are bold, so the blouse cut should be clean. Fussy details, such as layered frills or many seams, fight the print and cut through motifs. Use the table below as a starting point, then check the depth and width in our guides to blouse neck designs and blouse sleeve designs.

Cuts that work with kalamkari
CutWhy it worksWatch out for
Boat neckA wide, shallow front keeps a large area of print unbroken across the chestWide necklines can slip; a back dori or a closer shoulder helps
Round neckNeutral and easy; suits both small repeats and a plain body with a print borderA very deep round front can cut into a large motif
Collar or high neckGives a smart, shirt like look; buttons or potli buttons sit well on block printsNeeds a front opening for comfort; keep the collar narrow on small frames
Square neckThe straight lines suit geometric borders and block printed stripsCorners must be clipped and faced neatly or they pucker
Elbow sleevesShows off the print and suits most arms; a classic with cotton kalamkariLeave a little ease at the bicep, as cotton has no stretch
Three quarter or full sleevesMost of the print, good for winter and for office wearMay need more than 1 m of fabric
Puff sleevesLets a small amount of print stand out on a plain blouseToo much gather in stiff cotton looks bulky; ask for a soft puff

For the back, a deep U, a round back with a dori or a keyhole all frame a central motif well. A closed back with potli buttons suits pen work, where the panel itself is the decoration. See our blouse back neck designs guide for depths in inches, and the dori blouse designs guide for tie backs.

Placing the Motif Before You Cut

The most common disappointment with a kalamkari blouse is not the design but where the print lands. A tree of life that is half lost in a deep back, a peacock split by front hooks or a figure cut upside down cannot be fixed after cutting. Placement matters most with pen kalamkari and large block motifs; small all over repeats are far more forgiving.

Six blouse line drawings showing kalamkari motif placement: a tree of life centred upright on the back works, a tree cut by a deep U opening and a tree split by front hooks should be avoided, a tree upside down on the back should be avoided, matched upright motifs on both sleeves work, and a printed border along the back hem works
Centre a large motif, keep it upright and keep it clear of the neckline and the opening.
Placement checks to do with the tailor
Lay the fabric out flat and decide which motif is the hero piece before any pattern is marked.
Put the hero motif on the centre back line, below the deepest point of the back neck, so the opening frames it rather than cuts it.
On a front opening blouse, keep large motifs off the centre front, or the hooks and placket will split them in two.
Check which way the print runs. Trees, birds and figures must stand upright on every piece, including both sleeves.
Match the sleeves: the same motif at the same height on both arms looks deliberate; mismatched sleeves look like offcuts.
Keep large motifs clear of the bust point and darts, where the shaping distorts the drawing.
Use any printed border on the sleeve hems or along the back hem, cut on the straight grain so the line runs level.
One panel, one place
If your piece has one large panel that will not fit where you want it, use it on the back and cut the front and sleeves in a solid fabric. That is design 4 above, and it often looks better than forcing the panel onto every piece.

Which Saree Goes With a Kalamkari Blouse

The classic pairing is a plain saree with a kalamkari blouse. Pick the saree colour from the print, usually the black of the outlines, the red, the indigo or the mustard, and the blouse will look made for it. This is the same idea as wearing a plain saree with a heavy blouse: one busy piece, one calm piece.

Saree and kalamkari blouse pairings
SareeKalamkari blouse that suits itOccasion
Plain mul cotton or handloom cottonAll over block print, collar with buttons, print bordersOffice, college, lunches, everyday
Plain linenBlock print with elbow sleeves, or a collar blouseOffice, day events, travel
Solid silk or silk cotton with a zari borderPen kalamkari back panel, or a fine pen print all overFestivals, pujas, day weddings
Kalamkari sareeA solid blouse in a colour from the print, or a small kalamkari border on a solid blouseAny; see the next section
Ajrakh or other block printed sareeUsually a solid blouse instead; two strong prints clash unless the colours match closelyDay wear
Saree colours that sit well with kalamkari
With a red and black printblackmaroonmustardecruolive
With an indigo printnavywhitemustardrustgrey
With a mustard and green printolivebottle greenbrownmarooncream
With a pastel or coloured groundpeachmintbeigeteal

For a saree with its own strong print, such as an ajrakh saree or another hand block printed saree, a kalamkari blouse can work only if the two share the same palette and different scales: a large pen motif with a tiny block repeat, for example. When in doubt, keep one of them plain.

Kalamkari Blouse With a Kalamkari Saree

Many kalamkari sarees come with a blouse piece in the same print. You can stitch it as it is, but the result is a lot of print from shoulder to hem. There are two easier ways to wear a kalamkari saree.

Matching or solid blouse with a kalamkari saree
Solid blouseMatching print blouse
LookCalmer; lets the saree pallu and border showBusier, a head to toe print look
Best colourOne colour from the saree: black, maroon, indigo, mustard or oliveThe blouse piece supplied with the saree
Works forOffice, festivals, almost every occasionCasual day wear, and pen work sarees with a plain body
A middle wayAdd a strip of the saree print on the neck or sleevesCut the sleeves solid and keep the print on the body

Jewellery follows the same rule: one strong piece. Oxidised silver, temple style or wooden jewellery suits most kalamkari, and a boat or collar neck usually looks best with earrings rather than a necklace.

Buying the Fabric: Length, Base and What to Ask

Kalamkari blouse pieces are usually sold as about 1 metre of fabric, often around 44 inches wide. That is usually enough for a blouse with short or elbow sleeves in most sizes. For three quarter or full sleeves, a large size, or a design where motifs must be placed carefully, ask for about 1.25 metres, or plan solid sleeves.

Kalamkari blouse fabric by base
BaseFeelGood for
Cotton or handloom cottonCrisp and breathable; holds structureEveryday, office and summer blouses; collars and boat necks
Mul cottonVery soft and lightRelaxed blouses with soft sleeves; needs a lining for structure
Mangalagiri or silk cottonSmooth with a light sheenDressier blouses to wear with silk or silk cotton sarees
SilkRich and soft; usually dry cleanFestive pen work blouses with a back panel
Questions to ask before you buy a piece
Is it pen painted, hand block printed or screen printed?
What is the exact length and width? Is the motif a repeat or a single panel?
Which way does the print run, and is there a border along one edge?
Are the dyes natural? If so, expect a little colour in the first wash.
Has the fabric been washed? If not, wash it before stitching, as cotton can shrink slightly.

Our blouse material guide compares cotton, silk and lining fabrics in more detail.

Piping, Buttons, Mirrors and Tassels

Kalamkari does not need much decoration, but a few small finishes make a homemade looking blouse look tailored.

Finishes that suit kalamkari
Contrast pipingA thin piping in black, maroon or mustard on the neck and sleeve hems frames the print and protects the edges.
Potli or fabric buttonsCovered in a solid colour from the print, down a collar front or a closed back.
Mirror workSmall mirrors around a neckline or on a solid yoke suit block printed cotton for festive day wear. See mirror work blouse designs.
Lace or crochet edgeA narrow cotton lace on the sleeve hem softens a crisp blouse; keep it ecru or black.
Dori with tasselsA tie back with small tassels in a colour from the print; keep the tassels light on cotton.
Solid liningNot decoration, but it stops the print showing through on pale grounds and makes the blouse last longer.

What to Tell Your Tailor

Take your measurements, or an old blouse that fits well, along with the fabric. Our blouse measurement guide lists what to measure. Then go through these points.

A kalamkari blouse brief
1
Show the hero motifPoint out the motif you want on the back, or on the front if the back is closed, and say it must be centred and upright.
2
Give the neckline in inchesFor example a front neck depth of about 6 to 7 inches and a back neck depth of about 8 to 10 inches. Confirm the opening does not cut the motif.
3
Agree the sleevesLength, and whether the sleeves are printed or solid. Ask for both sleeves to be cut so the motifs match.
4
Ask for a liningSoft cotton lining, in a colour that does not show through the print.
5
Ask for a pre-washIf the fabric has not been washed, ask the tailor to wash and iron it first, or do it yourself in cold water.
6
Choose the finishPiping colour, buttons or hooks, dori or not, and whether any border goes on the sleeve hems.
7
Ask to see the layoutAsk the tailor to show you where each piece will be cut before cutting, especially for pen work.

Washing a Kalamkari Blouse

Kalamkari dyes are fixed with mordants while the cloth is made, but natural colours often release a little dye in the first few washes, and strong sun can fade them over time. Most cotton kalamkari blouses can be hand washed; silk kalamkari and blouses with mirror work or heavy trims are safer with a dry cleaner.

Washing a cotton kalamkari blouse
1
Wash it on its ownCold water, separately the first few times, and never with a light coloured saree.
2
Use a mild detergentA gentle liquid detergent. No bleach or whiteners.
3
Keep it shortDo not soak for long; a quick wash and gentle squeeze is enough.
4
Dry inside out in the shadeOut of direct sun, so the colours do not fade.
5
Iron on the reverseMedium heat on the back of the print.

Our saree washing guide covers cotton and linen care in more detail.

Plain Sarees to Wear With Kalamkari

The sarees below are plain, so they let a kalamkari blouse take the lead. Each is 5.5 m long and 45 inches wide. The mul cotton sarees come without a blouse piece, which suits a kalamkari blouse stitched separately, and take a gentle cold hand wash. You can see more in our plain sarees collection. Free delivery in India applies on orders of ₹2,000 and above.

After Dark, Olive Oasis and Toasted Almond are plain mul cotton at ₹1,699, in three colours that come straight out of the kalamkari palette: black, olive and a taupe brown. Bright Side (₹1,999) is white mul cotton with a yellow border, a fresh base for an indigo or red print. Cocoa (₹1,899) is mul modal with a 1 m running blouse piece in the same fabric, also a gentle cold hand wash. On Repeat is handloom linen with a zari border at ₹4,499, with a 1 m blouse piece and dry clean care; a mustard saree with an indigo and red kalamkari blouse is a classic office look.

Questions People Ask

Which saree goes with a kalamkari blouse?

A plain saree in a colour taken from the print, such as black, maroon, indigo, mustard or olive. Plain cotton and linen suit everyday kalamkari; a solid silk or silk cotton saree suits a pen kalamkari blouse for festivals.

Which neck design is best for a kalamkari blouse?

Boat neck, round neck and collar necks work best, because they keep a large area of print unbroken. On the back, a deep U or a round back with a dori frames a central motif well.

How much fabric is needed for a kalamkari blouse?

About 1 metre of 44 to 45 inch fabric is usually enough for short or elbow sleeves. For full sleeves, a large size or careful motif placement, about 1.25 metres is safer.

Can I wear a kalamkari blouse with a silk saree?

Yes. A pen kalamkari blouse, or a fine pen print on silk cotton, looks good with a solid silk saree, especially one with a plain zari border. Pick the saree colour from the print.

Does a kalamkari blouse bleed colour?

Natural dye kalamkari often releases a little colour in the first few washes. Wash it alone in cold water with mild detergent, do not soak it for long and dry it in the shade.

Should I wear a kalamkari blouse with a kalamkari saree?

You can, but a solid blouse in a colour from the saree usually looks calmer. A good middle way is a solid blouse with a strip of the saree print on the neck or sleeves.

Is a kalamkari blouse good for office?

Yes. A cotton block printed blouse with a collar or round neck and elbow or three quarter sleeves, worn with a plain cotton or linen saree, is a common office look.

How do I make a kalamkari blouse look designer?

Use the print in one place: a pen panel on the back, printed sleeves or print borders on a solid blouse. Add contrast piping and covered buttons, and make sure the main motif is centred and upright.

Should kalamkari fabric be washed before stitching?

If it has not been washed, yes. Cotton can shrink slightly and natural dyes may release some colour, so wash it in cold water and iron it before cutting.

Can I make a blouse from an old kalamkari saree?

Yes. The pallu or a panel from the body often has the best motifs. Use it for the back or the sleeves and cut the rest of the blouse in a solid fabric if there is not enough.

What is the difference between a pen kalamkari and block print blouse?

Pen kalamkari is drawn by hand, usually with one large panel or scene per piece, so it needs careful placement. Block print repeats small motifs, which makes it easier to cut and better for all over designs.

All guides