MAYIN Guides

Banarasi Saree Blouse Designs: Brocade, Necklines, Sleeves and Colours

Line drawing of five Banarasi blouse designs showing brocade all over, as a yoke, on sleeves, plain with piping and a brocade sweetheart

The best Banarasi saree blouse design balances the brocade. A heavily woven Banarasi usually looks best with a plainer silk blouse with zari piping or border sleeves, while a plain saree can carry a full brocade blouse. Brocade is stiff and has no stretch, so structured cuts suit it: a boat, round, sweetheart, square or high neck, elbow sleeves, a high or potli button back, and a soft cotton lining. Below are the cuts, closures, motif placement, lining and colour pairs, with a brief for your tailor. For the saree itself, its weaves and how to tell a handloom Banarasi, read our Banarasi saree guide.

At a glance
Onepiece leads: a busy saree takes a quiet blouse, and the other way round
1 mof brocade covers most short and elbow sleeve blouses
10 to 12 inan elbow sleeve, the classic length for brocade
1 inof side seam allowance, so a brocade blouse can be let out later
In this guide

Brocade Blouse or Plain Blouse: Getting the Balance Right

Brocade is a cloth with the pattern woven in, not embroidered on: extra threads of silk or zari are woven in to form the motifs, so the design sits on the face and the reverse shows loose threads or a ghost of the pattern. A Banarasi saree is brocade at its richest, and "Banaras Brocades and Sarees" has been a registered Geographical Indication since 2009. That richness is the first thing to plan around, because two pieces of dense brocade worn together compete for the eye.

The rule most tailors and families follow is simple: one piece leads. Look at how much of the saree is covered in zari and motifs, then let the blouse do the opposite.

Match the blouse to the saree
The sareeBlouse that balances itWhy
Heavy all-over brocade, dense jaal or zariPlain silk or katan in a colour from the saree, with zari piping or the border on the sleevesThe saree already has all the pattern; a plain blouse frames it
Brocade border and pallu, plain or lightly buttied bodyThe blouse piece as woven, or brocade on the sleeves onlyThe blouse repeats the border and links top and bottom
Light Banarasi: organza, georgette, small buttisBrocade sleeves or a yoke on a plain body, or a soft, light brocade blouseA light body leaves room for one rich piece, but a stiff, heavy blouse drags a light pallu
Plain saree, any fabric with bodyA full Banarasi brocade blouseThe blouse becomes the statement, close to the face

Matching or contrast is then your choice. A blouse in the saree colour looks traditional and lengthens the line. A contrast blouse looks more styled and lets you rewear one saree in new ways. Both are worn at weddings and festivals. For blouse cuts that suit all silks, including Kanjivaram and Mysore silk, see our guide to silk saree blouse designs; this guide stays with brocade.

The Blouse for Each Kind of Banarasi

Banarasi is not one fabric. The main bases are katan (pure silk), kora organza with zari and silk, and georgette, with shattir and tissue among the others, and the design styles include jangla, tanchoi, cutwork and butidar. Each base drapes differently, and the blouse should follow the base as much as the pattern. Georgette is a fine, light, open fabric woven from highly twisted crepe yarn. Tissue has zari in the weft over a silk warp, which is why it shines and feels crisp.

Blouse by Banarasi base
Banarasi baseHow it feelsBlouse that works
Katan silkSmooth pure silk with body; holds structureThe blouse piece or katan in a toning colour; collars, boat necks and elbow sleeves all hold well
Kora organzaCrisp and see-through, with woven zari or silk motifsA lined body with sheer organza sleeves, or a soft brocade blouse; avoid a heavy blouse that drags the light pallu
GeorgetteSoft, light and fluidA soft blouse in georgette or crepe with brocade piping; keep stiff brocade to the sleeves
TissueCrisp, with a metallic shine from zari in the weftA plain silk blouse in a deep colour; let the tissue do the shining
TanchoiSmooth and satin-like, with small close-set motifsA plain katan or satin silk blouse in one of the pattern colours
Jangla or all-over jaalDense, heavy pattern from edge to edgePlain silk with zari piping; no second brocade
CutworkMotifs whose loose threads are cut away at the back; often more affordableBrocade or plain; line it well, since clipped thread ends on the reverse can prickle

If you are unsure what base you have, the feel tells you most: organza is crisp and see-through, georgette is grainy and soft, katan is smooth with a deep sheen. Our guide to the types of silk sarees explains katan, kora and the silk labels in more detail.

Where the Brocade Goes: Five Layouts

A Banarasi blouse does not have to be brocade from neck to hem. Where you place the brocade decides how heavy the blouse looks and feels, and it is the easiest way to make one blouse piece work harder.

Line drawing of five Banarasi blouse designs showing brocade all over, as a yoke, on sleeves, plain with piping and a brocade sweetheart
Balance the brocade: a heavy saree takes a plainer blouse, and a plain saree can take a brocade blouse.
Five ways to use brocade
All-over brocadeThe whole blouse in brocade. The classic partner for a plain saree, and the heaviest option, so line it and keep the cut simple.
Brocade yokeA band of brocade across the chest or around the neckline on a plain silk body. Draws the eye up to the face with less weight.
Brocade sleeves onlyA plain body with brocade or border sleeves. Shows well even when the pallu covers the front, and is lighter to wear.
Plain with zari pipingA plain silk blouse with a fine zari or brocade edge at the neck and sleeves. The best match for a heavy Banarasi.
Brocade sweetheartAn all-over brocade blouse with a sweetheart neck and short sleeves. A structured evening look; the stiffness holds the curve.

A good test: hold the saree up with the pallu over your left shoulder, as you will wear it. A pinned or pleated pallu covers much of the left front, so brocade on the sleeves, the neckline and the back stays on view, while a busy pattern across the left front can disappear under it.

Banarasi Blouse Neck Designs and Sleeves

Brocade holds a crisp line, but it does not fold softly into a cowl or drape, and a deep neckline can stand away from the body instead of lying flat. That is why the cuts below come up again and again with Banarasi sarees.

Line drawing of six classic silk saree blouse cuts: collar, keyhole, boat, puff sleeve, dori back and potli button back
Heavier silks hold structure, so collars, elbow sleeves and button backs work well.
Necklines for a brocade blouse
NecklineApprox. front depthWhy it suits brocade
High neck or collar1 to 3 inchesStiff brocade stands up neatly; ask for a keyhole or back opening so you can get it on
Boat neck2 to 4 inches, cut wideShows a woven border across the collarbones; add strap holders
Round5 to 7 inchesThe easy everyday choice for any Banarasi
Sweetheart or square6 to 8 inchesThe firm fabric keeps the curve or the corners sharp
Deep V8 to 10 inchesBetter in soft katan or georgette than in thick brocade, which can gape

Measure every depth straight down from the shoulder line, and treat the numbers as a starting point; our saree blouse neck designs guide explains how. Because brocade cannot ease around the bust, many tailors stay a little shallower in thick brocade than in soft silk, and finish the edge with a facing in lighter silk.

Sleeves

Sleeves are where a Banarasi blouse often shows its border. The woven border of the blouse piece, or a strip cut from the saree, sits on the sleeve hem, and the length decides how traditional the look feels.

Sleeve lengths for brocade
SleeveApprox. lengthWith a Banarasi
Short5 to 8 inchesEasy to move in; a border on the hem keeps it festive
Elbow10 to 12 inchesThe classic length; shows the border and suits most arms
Three-quarter14 to 17 inchesFormal and warm; good for winter weddings
Full21 to 24 inchesNeeds half an inch to an inch of ease at the bicep and a wrist opening
PuffShort, gatheredWorks in organza or soft katan; thick brocade puffs can look bulky

Measure from the shoulder point, the bone at the outer edge of your shoulder. Because brocade does not give, a sleeve cut close to the arm in soft cotton will feel tight in brocade, so ask for ease at the bicep and test the fit with your arms raised. Our saree blouse sleeve designs guide covers measuring in full.

Backs, Potli Buttons and Closures

Brocade is thick, so a blouse in it needs a closure that lies flat and an opening planned before cutting. A plain back in brocade, a keyhole or a row of potli buttons all suit Banarasi sarees well, because the back shows when the pallu is pleated and pinned at the shoulder.

Keyhole blouse back, high back with potli buttons, and a close view of a potli button in a rouleau loop
Each potli button sits in a rouleau loop sewn into the opposite edge.

Potli buttons are small round fabric-covered buttons, each sitting in a narrow loop of bias-cut fabric called a rouleau. Brocade is usually too thick to turn into a neat rouleau, so ask your tailor to make the loops, and often the button covers too, from a lighter silk in the same colour, or from the plain part of the blouse piece. If the brocade is thin enough to cover a button neatly, a row of brocade buttons down a plain silk back is a good use for offcuts.

Choosing the opening
Front hooksBack hooks, zip or potli buttons
Dressing aloneEasy; you can fasten it yourselfUsually needs a helper
LooksLeaves the back free for a keyhole, a dori or a deep UKeeps a brocade front unbroken
In brocadeThe hook strip can add bulk at the bust; ask for a lighter facingA concealed zip lies flatter than hooks in thick fabric
Best withDeep backs with a dori and latkansHigh backs, potli buttons and square backs

A dori back works with a Banarasi blouse, but in stiff brocade the cords pull less smoothly, so keep the back moderate, around 8 to 9 inches, and use a silk rouleau for the cord. Our blouse back neck designs guide shows every back and how deep to go.

Cutting Brocade: Motif Placement and the Blouse Piece

With brocade, where the motifs fall matters as much as the fit. A large butta landing on each bust point, or a jaal that runs upside down on one sleeve, is hard to undo once the fabric is cut. Many Banarasi sarees come with a running blouse piece woven at one end, often in the body colour with buttas and a stretch of border; measure it before you choose a design.

How to cut a brocade blouse
1
Measure the pieceNote its length and width, where the border runs and where the motifs sit. About 1 m covers most short and elbow sleeve blouses; full sleeves and matched motifs need more.
2
Find the directionMany motifs have a top and a bottom, such as flowers on stems or paisleys. Cut every piece in the same direction, so nothing is upside down.
3
Place the main motifHold the fabric against your body in a mirror. Centre a large motif at centre front or centre back, and keep large motifs off the bust points.
4
Cut in a single layerCut one piece at a time, face up, so you can see each motif; then flip the pattern to cut its mirror image.
5
Plan the borderDecide where the border goes before cutting the body: sleeve hems, a band at the waist or along the neckline.
6
Mark with threadChalk barely shows on brocade, so many tailors mark lines with tacking stitches instead.

Cut the body first and the sleeves last, so you can match the sleeve motifs to the body. If your blouse piece is short, use a plain toning silk for the back or the sleeves and keep the brocade for the front. Our blouse fabric guide covers how much fabric each sleeve length needs.

Good to know
Brocade frays quickly at a cut edge, especially where zari threads are loose. Ask your tailor to overlock or bind the seam allowances as soon as the pieces are cut, and to leave wide allowances at the sides, about an inch, so the blouse can be let out later. Alterations through dense brocade are hard once it is finished.

Lining, Finishing and Comfort

Turn a Banarasi over and you will see why lining matters. In Banaras, motifs are woven in two main ways, named kadhua and phekwa (also written kadwa and fekua). In kadhua, each motif is woven separately with its own extra thread, so very little runs across the back. In phekwa, the pattern thread is carried across the full width, leaving long floats on the reverse; in cutwork, those floats are clipped away after weaving.

What the reverse means for your blouse
KadhuaPhekwa and cutwork
On the backFew loose threads; each motif is woven on its ownLong floats, or clipped thread ends in cutwork
Against the skinSmoother, but zari can still feel roughFloats catch on jewellery and nails; cut ends can prickle
LiningStill advised for comfort and shapeEssential; the lining protects the floats and your skin

A soft cotton lining is the usual choice. It keeps zari off the skin, absorbs sweat and stops floats catching. Cut it to the same pattern as the blouse and attach it at the neck and armholes, so the brocade and the lining move as one.

Finishing a brocade blouse
A soft cotton lining throughout, including the sleeves if the brocade is scratchy.
Seams overlocked or bound, and about an inch of side allowance for later alterations.
A facing at the neckline cut from lighter silk to cut down bulk, understitched so it does not roll out.
Sew-in interfacing, if any, rather than iron-on, because the heat needed to fuse it can mark zari.
Hooks or a zip on a firm lightweight strip, not straight into the brocade.
Sleeve hems faced in silk, so a zari border does not rub the inner arm.
Pressed on the reverse, at low heat, with a pressing cloth.

Brocade is warm. In a humid summer, a blouse with brocade only on the sleeves or yoke and a plain silk body feels lighter than an all-over brocade blouse, and short or elbow sleeves are cooler than full ones.

Colour Pairing for Banarasi Blouses

Most Banarasi sarees carry gold or silver zari, and that metal is the easiest guide to the blouse colour. A blouse in the colour of the zari, or a plain blouse in the body colour with zari piping, rarely looks wrong. A contrast blouse should pick up a colour already woven into the saree, from the border, the pallu or the small motifs.

Gold or silver blouse for a saree: saree colours that suit a gold blouse, a silver blouse or either
Gold for warm and deep sarees, silver for cool and pale ones.
Banarasi saree and blouse colour pairs
Red Banarasigoldbottle greenredmustard
Maroon or winegoldemeraldpink
Pink or ranigoldorangegreenroyal blue
Mustard or yellowmaroonbottle greenroyal blue
Royal blue or navygoldsilverpinkmustard
Greenpinkgoldmaroon
Pastel or ivorygoldsilverpeachmint
Blackgoldredsilver

Keep one metal from head to toe: gold zari with gold jewellery, silver zari with silver or oxidised pieces. With a contrast blouse, keep the contrast in the blouse body and let the zari piping or border bring back the saree colour, so the two pieces look joined. A red Banarasi for a wedding or Karwa Chauth is often worn with a red or gold blouse. Bottle green is a popular contrast, and mustard gives a warmer, more modern look.

Undertones, light to dark pairings and the full colour chart are in our saree blouse design ideas by colour.

A Banarasi Blouse With a Plain Saree

A Banarasi brocade blouse worn with a plain saree is one of the easiest ways to look festive, and it lets one blouse dress several sarees. The point to get right is weight. Brocade is stiff and heavy, so it needs a saree with enough body to carry it: handloom linen, tissue, raw silk and plain katan all can. On a soft, light saree, a full brocade blouse can drag at the shoulder and make the drape look limp.

Which plain saree carries which brocade
Plain sareeBrocade it can carryHow to wear it
Handloom linenA full brocade blouseCrisp linen stands beside brocade; elbow sleeves and a boat or round neck
TissueFull brocade or brocade sleevesPick a brocade in a deeper colour so the two shines do not merge
Plain silk or katanA full brocade blouseThe classic Banarasi blouse look; match the zari metal
Mul cottonBrocade trim onlyA soft, lined blouse with brocade piping or sleeve bands
Mul modalBrocade trim onlyStitch the running piece and add a brocade border at the sleeve hem
ChiffonBrocade trim onlyA crepe blouse with fine zari or brocade piping; a stiff blouse fights the fall

Keep the rest quiet: a plain saree with a narrow border or none, one jewellery focus and a simple pallu. Our guide to a plain saree with a heavy blouse goes further into blouse work, rewearing one blouse and jewellery.

Among MAYIN sarees, the pure handloom linen sarees with a zari border, such as Composure in pink and On Repeat in yellow, have the body to stand beside a full brocade blouse. Plain mul cotton, such as After Dark in black, suits a soft lined blouse with brocade sleeve bands or piping. Blouse colour ideas for each are in Sarees in This Guide below.

Your Tailor Brief and Care

A Banarasi blouse piece is often the most precious part of the saree, and there is rarely spare fabric. A clear brief and a trial fitting protect it.

Before your tailor cuts
Show the whole saree, not just the blouse piece, and say which piece leads: saree or blouse.
Say where the brocade goes: all over, yoke, sleeves only or piping.
Front and back neck shape, with the depth in inches from the shoulder line.
Sleeve length in inches, and ease of half an inch to an inch at the bicep.
Where the main motif sits, and that every piece is cut in the same direction.
Where the border goes, decided before the body is cut.
Closure: front hooks, back hooks, a concealed zip or potli buttons, and what the loops are made from.
Cotton lining, overlocked seams and wide side allowances.
A trial in plain fabric, or a basted fitting, before final stitching.

An example brief: "Blouse piece from my red Banarasi. Plain katan body, brocade elbow sleeves with the border at the hem. Round front, about 6 inches. Keyhole back with one potli button. Back opening with a concealed zip. Cotton lining, overlocked seams, one inch side allowances. Trial fitting first, please." Your numbers will differ; the detail is what matters.

Caring for a brocade blouse

Care, briefly
CleaningDry clean. Tell the cleaner it is brocade with zari. Never wring or soak it.
After wearingAir it inside out in the shade before folding; sweat and perfume can dull zari.
PressingOn the reverse, low heat, with a pressing cloth; never press zari directly.
StoringFold flat, wrapped in soft cotton or muslin, with tissue in the folds; keep it dry.

Silver-based zari can darken with moisture and time. Our zari saree guide explains the kinds of zari and how to store them to slow tarnish.

Sarees in This Guide

These plain and zari border sarees carry a Banarasi blouse well: linen and tissue for a full brocade blouse, plain mul cotton and mul modal for a soft blouse with brocade sleeves or piping. The swatches suggest blouse colours.

Sarees for a Banarasi blouse

Composure and On Repeat are pure handloom linen, ₹4,499, dry clean, each with a 1 m blouse piece. Miss Earth is a yellow handloom tissue with embroidery and zari, ₹3,499, dry clean, without a blouse piece; since it already shines, brocade on the sleeves in a deeper colour is enough. After Dark, Twilight Bloom and Olive Oasis are plain mul cotton, ₹1,699, without a blouse piece. Cocoa and Mauve Melody are plain mul modal, ₹1,899, with a 1 m running blouse piece in the same fabric. Both mul fabrics take a gentle cold hand wash. Every MAYIN saree is 5.5 m long and 45 inches wide. Browse linen sarees and plain sarees, with free delivery in India on orders of ₹2,000 and above.

Questions People Ask

Which blouse is best for a Banarasi saree?

Usually the blouse piece that comes with it, or a plain silk blouse in a colour from the saree with zari piping or border sleeves. Save a full brocade blouse for a Banarasi with a plain or lightly patterned body.

Can I wear a plain blouse with a Banarasi saree?

Yes, and with a heavy Banarasi it often looks best. Choose plain silk or katan in the body colour, the zari colour or a contrast from the border.

Can I wear a Banarasi brocade blouse with a plain saree?

Yes, if the saree has enough body: linen, tissue, raw silk or plain silk. On mul cotton or chiffon, use brocade as a trim on a soft lined blouse instead.

Which colour blouse goes with a red Banarasi saree?

Red or gold for a traditional look, bottle green as the classic contrast, or mustard for something warmer. Match the metal of any piping to the zari.

Which neck design is best for a Banarasi blouse?

Boat, round, sweetheart, square and high necks suit brocade because it holds a crisp line. Very deep necklines can gape in stiff brocade.

Are full sleeves good for a Banarasi blouse?

Yes, especially for winter weddings. Brocade has no stretch, so ask for half an inch to an inch of ease at the bicep and a wrist opening.

How much fabric do I need for a brocade blouse?

About 1 m for short or elbow sleeves. Full sleeves, matched motifs or a large size need more, so show your tailor the piece first.

Why is my Banarasi blouse scratchy, and does it need lining?

Zari and the loose pattern threads on the reverse rub the skin. A soft cotton lining fixes this, and almost every brocade blouse should have one. In summer, brocade only on the sleeves or yoke feels cooler than an all-over brocade blouse.

Is brocade the same as Banarasi?

Not quite. Brocade is a weave, with the pattern woven in using extra threads of silk or zari. Banarasi names where the cloth is made, Varanasi and nearby districts, registered as a GI in 2009; many Banarasi sarees are brocades, but brocade is woven elsewhere too, often on power looms.

How do I make a Banarasi blouse look modern?

Change the cut, not the fabric: a boat or square neck, a keyhole back with one potli button, or a plain blouse in an unexpected colour from the pallu.

Does a Banarasi saree come with a blouse piece?

Many do, as a running piece woven at one end, but not all. Check the listing, and measure the piece before choosing a design.

How do I wash a Banarasi blouse?

Dry clean it and tell the cleaner it has zari. Air it after wearing, press on the reverse with a cloth, and store it folded in soft cotton.

All guides